Search:

looks like a griot

looks amazing

how many hours did that take you ?

I have a ibis a5

what machine did you use for correction?

dlt21-David

"Correction: Menzerna FG400 on 6.5" LC White Polishing Pad"

With Audi having Rock Hard Paint why this Pad instead of something stronger ? Did you feel FG400 plus cutting Pad overkill?

thank you

"Same car, with a 2 step: Rupes 15: MF pad with S3 then Rupes yellow with Sonax PF."


What speed did you use for the MF pads?

What did you use besides m101? Did you use a rotary or Da ,which pads?

Did you use a rotary with the surbuf pads ?..at what speed

Corey

I had been using the exact same setup Flex3401 /CG MF pads/Scholls S3 on my friends 2009 Jet Black BMW and tore up one pad ..too much preasure ? speed about 5-6

Question, removed the...

Corey, what speed did you use on the 3401 with the mf pads,how much pressure?

thanks for reply..came out beautiful

"Polished with M205, white/green LC pads "

Rotary,Flex, Pc??

I know you also use CG Blacklight. Have you compared that to Blackfire P&S. I see some people are saying Blacklight is great as an AIO also . In your opinion does the CG BLacklight have the same...

I chose to use Menzerna Powerfinish (original version) on a "Yellow Buff and Shine pad "

Is this the same kind of yellow as say a uber yellow ..thought yellow was only for extreme situations ?

thanks for Info.

Ill check it out and see how much $$ we are talking about

After checking further most is inside. How do I get to that,or should I leave that to a PRO

Damage is definitely on the outside. I can feel it.

What gauge sanding paper should be used??

headlight mess
I have something on my Audi Headlights that I can not remove I have tried cleaning, polishing,goof off.paint thinner..CG water spot remover.. nothing budges it

plz any suggestions

How do you find the new Flex Rotary vs the 3401 in ability to handle. I have the 3401 and a chicago Harbor Freight sales rotary which to me is very difficult to control,though it may be my...

How much time did you spend on the car with the Rotary. How did it compare time wise to 3401?

Best way to remove high spots(Dark spots) from using too much in one spot ? More CS or Detail spray.?

I'm using an" extension" to position the pad a little farther away from the polisher so I can more easily see where the edge of my buffing pad is on the panel.

Does Auto geek sell this...

"I set up the Flex 3401 with a 6" Megs Microfiber cutting pad "

What speed did you use? Thought using Micro Cutting Pad on a Flex was a bad idea?

How are you using the sponge?
Running across pad or spinning pad into it?? plz advise

Nothing like free Marketing here