Such great replies and good ideas. Thank you all! Mike I would like to start using that form and am interested in a class if for no other reason than to validate my skills. thank you!
I started detailing for the local Porsche dealership in 98. Learned a lot and was an enthusiast since then. Doing my own cars and such. In 2007 I started 360detail. It was a small detail service I...
I book jobs every where I go now. It's incredible. When people see my setup it helps them make a confident decision they are using a professional. The pressure washer required a little modification,...
Right now anywhere from 400-1200 a week. I work at the fire station every 3rd day and detail on my off days. I expect it to pick up a bit now that I got the trailer wrapped.
All the equipment is at the back door. All exhaust ports point away from walls or towards the back. There's a large space between the generator and pressure washer. These two machines are never...
I decided to extend the drain valve and lines on the compressor and install a water separator. Put some clamps on some hose fittings and hung my Autogeek banner. 38922389233892438925389263892738928
...
I toyed around with buying skid mounted equipment or even looked at a rightlook trailer. You can build your own for less than half. I started with a custom build 6x10 trailer. I probably could have...
I do all my own designs. These cards are front and back. I do a lot of bikes and cars so these should appeal to everyone. I don't like cramming a bunch of info on a card.
I have a 6hp Rigid shop vac with the 2.5 in hose. The hose is short and not very flexible. I about to order a custom 30' flexible shop vac hose for this vac. Buying 30' in 2.5"diameter is not only...
Sigh. Man I do about 6 cars a week. I've had 2 of these. Great for that weekend warrior. Great for new spots. But really it's no different than a scrub brush, folex, and a full size wet vac. It...
I'm currently trying to research the difference between the 15 and 21. I got excited when I saw Mike Phillips did that car using both machines but he didnt really mention much about them like how...
There's a 20-30 gal Husky compressor from home depot on sale from 199 down to 169. That's what I bought. It's 4.3cfm at 90psi. It takes
About 3-5 minutes to fill up to the 125 psi. I set it to 90psi...
Any suggestions for a good all around wheel cleaner? I used to use ARO. It's a great tire and wheel well and engine cleaner. But need something with a bit more bite on brake dust. I've considered...