+1 It sounds to me like too much was used for the spray and wipe and natty's red. Especially the red if that ghosts at a later date like that it's obvious it was applied too thick. when you apply...
Hi and welcome to the site. I used to live in Rockaway and now have a place in Dover. I know the area well. What are you using to apply and remove product?
Knowing the NJ NY area it is the cost of land. Here in NNJ we had two next door to each other it was great. One had it's roof collapse and they tore it down. The one that is left is a disaster,...
I think i know what is going on. Since your used to a PC and holding it flat against a panel, with a rotary you can't hold it flat against the panel instead you want to have pressure on one side ie...
Something to keep in mind. D151 doesn't play nice with certain waxes and sealants. I tried it with Fuzion and PB's Natty blue and it streaked like crazy. I have heard that M16 does play well with...
After working 14 years as a tool and die maker and dealing a lot with Anodized aluminum. I would never ever use an abrasive of any sort on anything anodized. Especialy something that is supposed to...
I can't tell you yes or no. In my experience D151 doesn't play well with some sealants and waxes. I have never tried it with a glaze. In all honesty I wouldn't use a AIO product only to top it...
I toattally agree, 85 rd is a finishing polish and the orange is a cutting pad. Granted you never specified what machine you're using. I have used PO203 with a white pad on a makita rotary and it...
Your right that is definitely a small block in the engine bay. The Nascar motor is based on the 351W block. It is a stroker kit. ford sells a 427 stroker kit based on the 351 windsor motor. 500...
I like the idea Mike had withe adding M105 to D151 call it MD256. Once all the snow melts up here in NJ I will try it on a few practice cars to see how it turns out.
Not only jeweling but you really can't spread at 1000 rpm. It slings like crazy. One thing nobody talks about is that at speed setting #1 the Flex's throttle is an on/off switch. On the makita the...
I have both the Makita and the 3403. for a beginner i would go with the Makita hands down. The Makita is the slowest at it's lowest speed setting. As a beginner I have found the slowere you go the...
I got in on the same ebay sale. I had both my cans go all mooshy on me. From what I could tell the reason why the wax got all mooshy was due to the combination of heat and the rough handling of the...
If you guys like PB's S&W and S&G try PB's QD+. The smell is incrediable and it leaves the paint noticibly slicker, plus it leaves a layer of wax. Keep in mind it can be a bit streaky but just let...
My fav. beer of all time has to be Great Lake Breweries Scotch ale it is 9.0% and smooth as velvet you don't feel the alcohol until you get up from the table and the world begins to spin faster and...
I have used this stuff for a few years now. I have to admit it is one of my favorite products. I have used it to do a lot of things. I use it to clean tires with layers of tire shine on them and...
I am in the same boat. My work van has some nice tiger stripes as you so perfectly put it. I have tried lower speeds that helped a bit and less agressive pads. I am still getting holograming and...
