After talking with my lead Man apparently we have been doing this for almost 10 years! man how time fly's when your have fun!
Basically the truck stem is longer and a truck rim is thicker so the...
We started doing this 6-7 years ago! It's a great time saver! We also found that using a rubber truck valve stems works better, we use a 2 gal sprayer and drill a 5/8" hole, lubing the stem with...
Being Jeeper for over 40 years and we own 2 CJ7s with hard tops ( one is from a Wrangler) tops always off during the summer so before putting them back on in the fall I re color them with SEM semi...
Joe unless you have bought a brand new one in the last 2-3 years they are all type 1s all of my older ones are type 1, B&D, dewalt, snap-on are type 1. The type 2-3 show it on the spec. tag ( on the...
I posted this about a week ago,
The type 2 had a problem with the trigger and it was discontinued , and replaced it with a retro fitted kit from the type 3. This retrofit comes as kit with ...
The type 2 had a problem with the trigger and was discontinued!
DeWalt has a retrofit, it uses the type 3 trigger. It comes with install instructions that will take care for your problem.
...
Any DA backing plate with 5/16 fine thread stud will work. the supplied 8" backing plate is a bolt through style. In fact last week took the pad off the air DA and used it on the Dyna worked great....
We have 3 and use them on the cheap HFT buffers work great. BUT put a 6" backing plate on it the 8" it comes with is to big and awkward, hard to control, and make the pattern to big.