Once ink or dye as been allowed to set no amount of APC will remove it. Steam might help, but it will also lightly damage the top coating of the leather.
I liked the high foaming as I felt it helped migrate the dirt up through the fibers. Later on when I started to extract carpets it became a problem so I stopped using it. Still have KK but I...
Have you tried using a real stain remover instead of just an APC? Folex has worked the majority of the time for most stains and ususally if that doesnt work I resort to using steam and krud kutter.
The real important part in shampoos is the lubricity. Lubricity is what prevents dirt from marring your paint. Manufacturers make their shampoos "sudsy" to make...
Both are alkaline cleaners(as is almost all APC's) and safe for all wheels so you shouldnt really have to worry about it. Dedicated wheel cleaners are the ones that can be one or the other.
You shouldnt need a wheel cleaner once you have them cleaned up real good. Apply a wax or sealant on the wheels and all you will need to clean them is soap and water.
Layering is useless and has been proven thickness does not increase with additional applications. 2 layers for complete coverage is more than adequate.
Charge about $20- $25 per foot. with RVs and boats. They are in a different ball park then cars. Not only are they long but they are also high and wide(dont forget the roof). Also factor in the...
I havent really been on the forums much these past couple months since I've been trying to get back into building a track car. With that said, detailing has been put on the back burner and while I...
None of those additives really work. Gas already has detergents in it and being a natural solvent would clean most every thing. Also all cars have an inline fuel filter that traps all...
Carnauba or sealant. It doesnt really matter what it is. Its their formulatiosn that make up its durability. With that being said, AW is a spray sealant and a booster product, not a lsp like OCW. ...
The brand is too new at AG so people havent had the time yet. I tried quite a few of their like years back and most was average at best. However the 3 products you ordered are good, so no worries....
Besides the cheap ebay clay bars its all personal preference. There really is no best bang for the buck clay. Pricing is so similar between all major brands per oz, at best you'll save a dollar or...
Haha, Yea I have a lot of unnecessary detailing products and tools, but they make life a little bit easier. Ive use the 3m trizact quite a bit and i know the finish it leaves behind (very very light...
Wow! I think its great and all but completely unnecessary. Meg/3m 3000 grit foam already leaves a finish so well and easy to buff off what is the point of a 5000grit disc? so you can polish out the...
For a cheap effective clay to use from a business stand point and when doing customer cars, more than likely the paint will be heavily contaminated to where there is a better trade off to using an...
If you are going use a QD afterwards on the paint why not just stick to the most economical(onr/DP on bogo)? If you are doing two steps you will get better results using two different products vs an...