My question would be how long before I begin getting a nice red tint on the buttocks of my khaki pants...I would wager the first time I was in the car for more than 20 min. Lol.
Here is an example of the types of amazing results you can achieve with 3M's Trizact 1500/3000 disc combo followed by a buff/polish. These are before and after photos of a a black hood that I leveled...
If you want to view it that way, but the point remains the same. Just as ONR is not meant to extend oil life, 303 is not meant to extend tread life. You would need to coat tires regularly with a very...
All I'm saying is that the claim he's making is the equivalent of saying that putting a few spritzes of ONR in your intake manifold every 1k miles will make you not have to change your oil for 20k...
If this were the case, 303 would no longer be in business because they would have either been bought out by Big Rubber or "disappeared" by them. Ha ha.
I had something similar happen to me when applying WGDGPS 3.0. At some point during my first of 2 coats I managed to get some splatter from the DA which I failed to spot during buffing. I proceeded...
You could try to wet sand to reduce and buff/polish after, but honestly that looks like it may be too deep to fully correct without going through the clear.
I was able to clean the projector lens back face last night, and it turned out well. I don't think I'm going to worry about disassembling the housing, as it's not too terribly dirty.
Yeah that's what I was thinking. I know where the leak was (which is responsible for the hazing) so I'll get that sealed up, but I just want to make sure that I don't use anything that will leave...
Bulb-side. I can disassemble the light, I'd just rather try to clean it through the bulb socket. I've heard of people attaching microfiber to a dowel and gently cleaning through the socket with...
I'm installing a new HID/LED LO/HI combo for my headlights this weekend, and during the disassembly I noticed that I have some pretty heavy hazing on the internal face of one of the projector lenses....
I've used my PC for color sanding with 1500/3000 grit trizact and it works beautifully (I used a low-orbit pneumatic finishing palm sander for the final cut). I will say that I would expect it to be...
I work as an engineer for Toyota, and given my experience, there's a good chance that a lot of them will just be totalled under insurance and replaced. The cost of repairing severe hail damage,...
Love the wheels. If you want to stay in that area of the color spectrum, go with a graphite, or gunmetal. That way you don't hide the design, but still have a darker appearance that's not so flashy. ...
The reason you would typically prefer electric is for the torque. Air pressure can create insane speeds, but you don't get the oomph that comes with an electric motor, resulting in stalling. Example:...
I'll hop in here to say that you need to ensure that the air DA has a decent throw/orbit and is not a short throw/small orbit finishing sander (shorter throw decreases effectiveness exponentially)....
Go ahead and prepare yourself that you'll likely need to compound/polish out whatever scratches or swirls that are left behind, because I assure you that there will be some. On a more related note,...
My buddies did this to me years ago in high school. Only put them on the wheels, but the dang stuff was a bear to remove. I ended up using a plastic scraper , coupled with 3m adhesive remover and...