-
Super Member
Rupes iBrid Mini HLR75 Design Flaws SOLVED!
I purchased a Rupes iBrid Mini HLR75 when they first came out.
The first day I used it (it looks different) I found design flaws.
One of them was how you set it down. Another was the trigger/paddle.
First, you really can't set it on its back like you can most other polishers.
Second, if you accidentally touch the paddle with the power on you get to wear compound.
After my first day, I made a cradle.
This allowed me to set it down with the power on (clean pads, change pads, etc.) without engaging the paddle.
I have used this cradle every day since without accidentally wearing compounds/polishes.
I really like the HLR75 and I probably do 1/3 of every car with it (bumpers, curved areas, etc.)
Even with the cradle, occasionally I found I was still wearing compound if...I grabbed it funny or set it on my lap etc.
Recently Rupes came out with a trigger lock. For me, this has solved accidentally bumping the paddle on the machine.
I like this machine and I use this machine a LOT! With the updates, it has now become a good UX.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Rupes iBrid Mini HLR75 Design Flaws SOLVED!
It took me a minute to figure out UX. What industry does that come from?
-
Super Member
Re: Rupes iBrid Mini HLR75 Design Flaws SOLVED!
I was holding off buying the HLR for the new actuator mod. Until I saw this:
RUPES HLR75E trigger update - YouTube
After I discovered it was just a simple part to replace I asked Jon what model he preferred? And he like the original.
-
Super Member
Re: Rupes iBrid Mini HLR75 Design Flaws SOLVED!
Yes, it appears the Rupes HLR 75 "Achilles heel" trigger/paddle problem has been addressed and resolved.
Start at 6:35
Bookmarks