Thanks: 0
Likes: 0
Dislikes: 0
-
Mille pad combos
I know this has been gone over a 100 times on here. I’m just wanting to know if anyone has tried the Rupes UHS system with the Mille. What are your thoughts on this combo with the Mille?
-
Re: Mille pad combos
Mille specific pads
Or
LC thinpros
LC lambswool(foam inner layer)
B&S Uro Wool(foam inner layer)
Optima hyper wool(foam inner layer)
Pretty sure LC is also selling HDO wool pads with inner foam layers..ingot samples mailed to me like this at least
These will also work on the Makita PO5000C
So cliff notes
These machines like Thin foam pads and wool needs to have a foam inner layer..regular wool or foamed wool will upset the machine balance and induce vibration.
Sorry I can't comment on the Rupes pads
-
Re: Mille pad combos
Thanks for the info. I have a order on the way with the LC foam wool pads for the rotary. But it looks like I’ll have to put in another one for the HDO pads. I’ve seen a ton of post on here and other sites where everyone is using a lot of different combinations with the Mille. But I haven’t seen anyone using it with the UHS system. I am a fan of the UHS for one steps and have a Mille on pre order. In theory I would think this would be an excellent pairing with the Mille. Just curious why no one has tried/mentioned it yet.
-
Super Member
Re: Mille pad combos
I say give it a shot with the grey UHS pads and polishes!
Todd (Rupes) mentioned that he liked the UHS compound on the blue foam cutting pads. I've also used it on yellow with beautiful results.
-
Re: Mille pad combos
I guess I’m going to have to try it to find out when the Mille gets here. It’s a good system. I didn’t know if there was some reason it wouldn’t go well with the Mille. I guess we’ll find out when it gets here.
-
Re: Mille pad combos
If you have it on hand, try it..that's how I found out what.my machine liked and didn't like
-
Re: Mille pad combos
Don’t have the Mille yet. I’m still waiting for the pre orders to be fulfilled. I was just curious about this combination before it arrives.
-
Re: Mille pad combos
Oh? Didn't know they were still on pre order. I know a few guys have them as does a local guy
-
Re: Mille pad combos
I’m still waiting. I think they get them in batches and send them out as they come in to the people who pre ordered first.
Similar Threads
-
By Dan Tran in forum Auto Detailing 101
Replies: 3
Last Post: 10-25-2019, 05:52 AM
-
By JCDetails in forum RUPES BigFoot Oribital Polishers
Replies: 7
Last Post: 01-09-2018, 12:02 PM
-
By PaulMys in forum Hot topics & Frequently Asked Questions
Replies: 9
Last Post: 05-29-2016, 09:21 PM
-
By MaxTL in forum Auto Detailing 101
Replies: 5
Last Post: 03-10-2012, 03:27 PM
-
By 305Cane in forum Auto Detailing 101
Replies: 0
Last Post: 11-18-2009, 11:05 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks