-
Super Member
Re: i am disappointed from my 21 MK2
Originally Posted by SWETM
Thank you Todd for the answer.
My pleasure.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: i am disappointed from my 21 MK2
Using a Rupes is like using straight non synchronized gearbox, olnce you master it, it is faster. Forced rotation is like synchronized gearbox, it is slower but easier to use. I also have a 15 and 21 mk2 and no problem with stalling at all. However i had one 15 mk2 which had bad stalling so it was defective unit.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Re: i am disappointed from my 21 MK2
Originally Posted by Todd@RUPES
If we freeze the rotational movement, large-diameter random orbital polishers like the 21 will still produce more movement across the entire diameter of the pad than most gear-driven polishers do at full RPM.
A bit hard to believe, but I trust you.
-
Re: i am disappointed from my 21 MK2
Originally Posted by Joel1979
Using a Rupes is like using straight non synchronized gearbox, olnce you master it, it is faster. Forced rotation is like synchronized gearbox, it is slower but easier to use. I also have a 15 and 21 mk2 and no problem with stalling at all. However i had one 15 mk2 which had bad stalling so it was defective unit.
The best detailers I’ve trained are the ones that had a natural talent for long throws, the hobbyists or mediocre detailers always went the other route and its easy to identify between them on this site too.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 3 Dislikes
-
Super Member
Re: i am disappointed from my 21 MK2
Originally Posted by Ronin47
The best detailers I’ve trained are the ones that had a natural talent for long throws, the hobbyists or mediocre detailers always went the other route and its easy to identify between them on this site too.
LOL!!!!!!!!!!!!!!!!!!!! So no good detailers use a 3401? Now yer pushing it. HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA You funny
"Dirt likes detergent so much better than the surface that it's attached to, it'll leave that surface to go hang out with the soap"... aim4squirrels
-
Re: i am disappointed from my 21 MK2
Originally Posted by dcjredline
LOL!!!!!!!!!!!!!!!!!!!! So no good detailers use a 3401? Now yer pushing it. HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA You funny
I rest my case ;-)
-
Post Thanks / Like - 0 Thanks, 0 Likes, 1 Dislikes
-
Super Member
Re: i am disappointed from my 21 MK2
Originally Posted by Ronin47
The best detailers I’ve trained are the ones that had a natural talent for long throws, the hobbyists or mediocre detailers always went the other route and its easy to identify between them on this site too.
One one hand, I totally understand, on the other, there are some pretty good paint poiishers using the 3401.
I have to admit that I'm surprised how few of them are used in the shops where I'm from.
Two of the most notable detail shops in my area use Rupes 21s.
One shop has a 3401, but no one really uses it. The detailer I hire to assist on big jobs has one too, but he never really brings it. He usually brings the Rupes 21, and the PC 7424xp.
I do like the 3401 though. Great for cleaner waxes, and one step polishing. For heavier correction I prefer the random orbital.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: i am disappointed from my 21 MK2
Originally Posted by Ronin47
The best detailers I’ve trained are the ones that had a natural talent for long throws, the hobbyists or mediocre detailers always went the other route and its easy to identify between them on this site too.
And you went out and got yourself a Mille? grin...
Tom
Mr Tommy's
Wash, Buff, Wax
Website: mrtommyshine.com
-
Super Member
Re: i am disappointed from my 21 MK2
Lol. Butt hurt when you try and talk bad about a product, like it's yer baby? No, yer the baby crying that someone else doesn't agree with your opinion. Lol ha ha ha ha
"Dirt likes detergent so much better than the surface that it's attached to, it'll leave that surface to go hang out with the soap"... aim4squirrels
-
Super Member
Re: i am disappointed from my 21 MK2
All I have to do to get YOU to THINK I'm a good detailer is buy a 21mk2? Well I'm gonna get myself one for Christmas so I can be one of the cool kids!!!!!!!!!! All I come here for is your approval man and finally you told me how to get it! THANK YOU AND HAVE A MERRY CHRISTMAS!!! I'll send you the receipt when I buy it buddy, pal, confidant. Oh goodie goodie, I can't wait till Xmas now!!!
"Dirt likes detergent so much better than the surface that it's attached to, it'll leave that surface to go hang out with the soap"... aim4squirrels
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Similar Threads
-
By acc1079 in forum Customer Comments
Replies: 2
Last Post: 01-19-2021, 12:11 PM
-
By DetailKitty in forum Off-Topic
Replies: 7
Last Post: 06-08-2016, 09:43 AM
-
By ViGi in forum Hot topics & Frequently Asked Questions
Replies: 13
Last Post: 04-24-2014, 05:22 PM
-
By Moose's Mobile in forum Customer Comments
Replies: 29
Last Post: 02-01-2013, 05:23 PM
-
By psynx in forum Customer Comments
Replies: 4
Last Post: 12-30-2012, 06:25 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks