Thanks: 0
Dislikes: 0
-
Super Member
Re: Rupes mark ii 15 stalling badly
I have a hard time grasping these issues, I have the original Rupes 21 and other then weird curved panels it doesn't stop.
On speed 4.5 I can put a ton of pressure and it will just keep spinning.
I'm going out on a limb that the machine has an issue.
Best bet might be to find a detailer in your area that uses Rupes polishers. Bring your polisher for him to try it out. Maybe even a fellow Autogeek might be in your area that has experience using a Rupes polisher.,
David 2000 Ford F-350 DRW CCLB BLACK/GOLD
Wish list:
Everything Mike has in his garage for detailing
-
Super Member
Re: Rupes mark ii 15 stalling badly
That's really weird, I've heard people complain about these machines stalling on curves, but never a flat panel like you describe. I have a legacy Rupes 15 with a washer mod and I can use anywhere and everywhere without stalling at speed 4 and above. What speed are you using? Perhaps you do truly have a defective machine. Maybe Dylan will see this thread and chime in.
Can you post a video of what's happening for you?
-
Super Member
Re: Rupes mark ii 15 stalling badly
Don,
Just replied to your email with Jason Rose in copy - best thing at this point rather than speculating about what is causing the issue is to see you working with it. If possible get a short cell phone video and send it over to us - sometimes its something really simple that we're just not thinking of.
For everyone else - lets not turn this into a Flex v. BigFoot debate - he didn't come here asking people to critique his purchase, he asked for advice on the tool he has and he has received it. If we want to turn it into a polisher pi$$ing contest I'll happily challenge anyone to a correction contest with the tool of their choice. Some of the statements made here are flat out false and/or uninformed - but thats for another thread, and not one where someone is asking for assistance.
Back on topic - I shared an anecdotal situation with Don in my reply - we challenged someone to stall a 15 Mark II at Detail Fest on our Fiat demo hood. They put their full weight on the tool, off angle, and at max speed rotation continued... to the point the pad smoked, he cooked the compound (broke the emulsion) and left a nice brown stain on the Fiats paint. Its quite difficult to stall out the Mark II on brute force, it takes a pretty deep curve or hard edge and even then its still polishing. Rotation is only part of the equation... that 15mm stroke still gets a lot done.
-
Super Member
Re: Rupes mark ii 15 stalling badly
Glad to see the OP is getting the help he needs. As always, Rupes is a first class organization and comes to the assistance of Rupes owners when necessary. This is one of the many reasons I continue to support Rupes.
-
Super Member
Re: Rupes mark ii 15 stalling badly
I can definitely understand people's frustration with the pad rotation issues. The whole thing can be solved in two ways:
1) Practice, practice, practice
2) Use the right tool for the particular job.
No matter how good you learn to operate a Rupes, you may still need to have another machine that may be better suited for some curves and contours.
Always keep the shine in your life.
-
Re: Rupes mark ii 15 stalling badly
Originally Posted by runrun411
I can definitely understand people's frustration with the pad rotation issues. The whole thing can be solved in two ways:
1) Practice, practice, practice
2) Use the right tool for the particular job.
No matter how good you learn to operate a Rupes, you may still need to have another machine that may be better suited for some curves and contours.
I disagree,my 15ES on orbit alone corrects, never needed to pull out my 3401 or PE-14 on curves where the 15ES couldn't correct as a result of loss of rotation. They designed to correct with orbit alone as a result of the long throw. No need for another machine.
Too much false information on the forums. 8mm throws need rotation, long throws cut on orbit.
-
Super Member
Re: Rupes mark ii 15 stalling badly
Originally Posted by Zubair
I disagree,my 15ES on orbit alone corrects, never needed to pull out my 3401 or PE-14 on curves where the 15ES couldn't correct as a result of loss of rotation. They designed to correct with orbit alone as a result of the long throw. No need for another machine.
Too much false information on the forums. 8mm throws need rotation, long throws cut on orbit.
Interesting comment. I use a Mini/PE-14 on tight areas and have never tried to correct with orbit on a long throw.
-
Super Member
Re: Rupes mark ii 15 stalling badly
Originally Posted by Zubair
I disagree,my 15ES on orbit alone corrects, never needed to pull out my 3401 or PE-14 on curves where the 15ES couldn't correct as a result of loss of rotation. They designed to correct with orbit alone as a result of the long throw. No need for another machine.
Too much false information on the forums. 8mm throws need rotation, long throws cut on orbit.
Amen!
2013 Genesis Coupe 3.8 Track Edition
2015 Hyundai Sonata Limited, 2016 Pearl White Nissan Altima SR
2019 Nissan Rogue SL
-
Super Member
Re: Rupes mark ii 15 stalling badly
Originally Posted by roguegeek
or... Buy a 3401 and have a machine that's built better, corrects faster, and won't ever bog down no matter what the circumstance.
booooooooooooooooo hissssssssssssss
Not too mention Flex cloning a long throw machine LOL.
Guess Rupes was eating into their market share and they felt compelled to respond with a knock off.
2013 Genesis Coupe 3.8 Track Edition
2015 Hyundai Sonata Limited, 2016 Pearl White Nissan Altima SR
2019 Nissan Rogue SL
-
Super Member
Re: Rupes mark ii 15 stalling badly
Originally Posted by custmsprty
booooooooooooooooo hissssssssssssss
Not too mention Flex cloning a long throw machine LOL.
Guess Rupes was eating into their market share and they felt compelled to respond with a knock off.
crazy talk
All the Europeans are producing knockoffs (REMOVED OUTSIDE LINK, PLEASE REVIEW TERMS/CONDITIONS IN FAQ ON TOOLBAR)
Similar Threads
-
By Reno in forum Ask your detailing questions!
Replies: 9
Last Post: 06-01-2020, 07:41 AM
-
By Nick McKees37 in forum Car Care Product Giveaways
Replies: 81
Last Post: 09-14-2016, 03:13 PM
-
By Elger in forum Wool & Foam Buffing Pads
Replies: 3
Last Post: 06-21-2016, 09:32 AM
-
By The Guz in forum Show N' Shine
Replies: 29
Last Post: 05-21-2016, 07:46 AM
-
By SonOfOC in forum RUPES BigFoot Oribital Polishers
Replies: 15
Last Post: 12-25-2015, 04:20 PM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks