Thanks: 0
Likes: 0
Dislikes: 0
-
Re: Black C6 paint, nothing is working! (Makita 9227c)
Try the LC crimson and M205 on the Flex 3401(speed 5). Just a few passes. Do not use MF to finish, especially with the Flex 3401.
-
Super Member
Re: Black C6 paint, nothing is working! (Makita 9227c)
Yep what Mark said, MF to cut and polish, foam to finish.
-
Re: Black C6 paint, nothing is working! (Makita 9227c)
Yup the MF pads don't finish well. I usually finish with the white lc pad
-
Junior Member
Re: Black C6 paint, nothing is working! (Makita 9227c)
Originally Posted by Dellinger
Kyle,
I assume you have 'completed' your compounding and polishing over the entire car and thus your picture is representative of the finish overall?
If so, have you tried another test spot with M100/orange & M205/black on the Flex?
-Gabe
I got a few panels into the detail when I realized what I was doing was not working...so I stopped at that point and started playing with different combos. I ended up sticking with the FLEX and doing M100 and optimum microfiber cutting pad, and finished with M205 and tangerine LC hydro...this is pleasing me just fine now
Originally Posted by Bkazzle
Sometimes, well probably most of the time MF pads don't finish well with the Flex IMO.
!
With the Flex...
What MF pads were you using?
What speed were you finishing with?
Did you try using a finish FOAM pad?
Yea, I found that 205 and an LC hydro tangerine finished the best overall. Thanks for the help folks!
-
Super Member
Re: Black C6 paint, nothing is working! (Makita 9227c)
Way to knock it out! Now break down and by the Menzerna Line up.
PCB Reflections LLC
Specializing in Corrections and Protection
Servicing Greenville SC & Surrounding Areas
Similar Threads
-
By VW 91 in forum Auto Detailing 101
Replies: 15
Last Post: 03-01-2011, 10:24 PM
-
By 93fox in forum Ask your detailing questions!
Replies: 7
Last Post: 12-30-2010, 11:51 PM
-
By Palani in forum Auto Detailing 101
Replies: 9
Last Post: 10-17-2010, 11:13 AM
-
By Bubbabuff in forum Rotary Buffers
Replies: 2
Last Post: 07-20-2009, 06:29 PM
-
By pricha00 in forum Show N' Shine
Replies: 2
Last Post: 08-04-2008, 06:15 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks