![Thanks](https://www.autogeekonline.net/forum/dbtech/thanks/images/thanks.png) Thanks: 0
![Likes](https://www.autogeekonline.net/forum/dbtech/thanks/images/likes.png) Likes: 0
![Dislikes](https://www.autogeekonline.net/forum/dbtech/thanks/images/dislikes.png) Dislikes: 0
-
-
Super Member
Re: Got a rotary for christmas
I would not recommend using a rotary immediately. You risk burning through your clear coat. Start with a DA first
Bill 1234
2004 audi a6 quattro (traded).
2015 Ford Escape 2.0l ecoboost 4WD
-
Super Member
Re: Got a rotary for christmas
![Quote](https://www.autogeekonline.net/forum/images/autogeek/misc/quote_icon.png) Originally Posted by Bill1234
I would not recommend using a rotary immediately. You risk burning through your clear coat. Start with a DA first
Getting a perfect finish with a rotary is a skill that takes many years of practice! You should strongly consider picking up a D/A buffer and finish out your paint with a fine polish for a permanent
swirl free finish!
-
Super Member
Re: Got a rotary for christmas
The reason the swirls came back, is because they never left your paint. The polishing oils hid them. It's important to do a solvent wipe down after polishing to get rid of the oils before applying a wax/sealant.
Not that it matters, but are you a female?
-
Re: Got a rotary for christmas
![Quote](https://www.autogeekonline.net/forum/images/autogeek/misc/quote_icon.png) Originally Posted by Rsurfer
The reason the swirls came back, is because they never left your paint. The polishing oils hid them. It's important to do a solvent wipe down after polishing to get rid of the oils before applying a wax/sealant.
Not that it matters, but are you a female?
Nope not a female LOL
-
Re: Got a rotary for christmas
So i should not use the rotary? I have some experience using them. Not that im a expert. I have use them on a boats but with a wool pad. What D/A do you recommend the PC. Also witch product and combination? orange pad, and white?
-
Super Member
Re: Got a rotary for christmas
my point is here, yes, you might like the rotary and im not saying by any means give it away or lose it. However you run a large risk of damaging paint very easily
Bill 1234
2004 audi a6 quattro (traded).
2015 Ford Escape 2.0l ecoboost 4WD
-
Re: Got a rotary for christmas
![Quote](https://www.autogeekonline.net/forum/images/autogeek/misc/quote_icon.png) Originally Posted by Bill1234
my point is here, yes, you might like the rotary and im not saying by any means give it away or lose it. However you run a large risk of damaging paint very easily
What D/A do you recommend the PC. Also witch product and combination? orange pad, and white?
-
Super Member
Re: Got a rotary for christmas
![Quote](https://www.autogeekonline.net/forum/images/autogeek/misc/quote_icon.png) Originally Posted by Bamby
What D/A do you recommend the PC. Also witch product and combination? orange pad, and white?
The porter cable is the typical go to DA for the newbies. Its a great machine to learn on. I personally went right to the meguiars g110v2 because I was not told about the pc and I didnt want two machines. However, I would get the porter cable with two pads of each color. M105 and m205 are great compounds too. Your backing plate should match the pad size
Bill 1234
2004 audi a6 quattro (traded).
2015 Ford Escape 2.0l ecoboost 4WD
-
Super Member
Re: Got a rotary for christmas
You got a good buffer just need to use it more to get the hang of it.After some time you will be better and can do more with it.you may also what to get a pc to get it wright for now. Just use the pc after you buff with the rotary .
Similar Threads
-
By tattooman in forum Auto Detailing 101
Replies: 23
Last Post: 01-23-2019, 04:45 PM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 2
Last Post: 08-20-2018, 08:00 AM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 10
Last Post: 09-08-2015, 11:48 AM
-
By Qusai in forum Auto Detailing 101
Replies: 10
Last Post: 10-24-2012, 04:59 PM
-
By ANeat in forum Show N' Shine
Replies: 19
Last Post: 11-21-2010, 11:52 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks