Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
Product Claims:
Solution Finish is an incredible new product that restores originally black surfaces to a deep, rich black "wet look" shine that dries quickly with no greasy residue.This unique formula combines ancient ingredients with advanced polymer technology to provide a spectacular, long-lasting, black, protective finish. Formulated for professional use only, Solution Finish is a silicone-free solution that uses all natural oils and is VOC compliant.
Solution Finish was developed by professionals for professionals – you won't find this product on the wax walls in your local retail outlets. It is formulated using only the finest ingredients that you don't usually find in mass-produced, OTC products. Solution Finish is ideal for restoring, conditioning and protecting any originally black surfaces.
If it oxidizes, Solution Finish can restore it!
Introduction:
Ahhh, the age-old question of what to use for faded trim? There's a long history of evolution in plastic trim detailing products. From the dime a dozen "dressings" to a couple durable polymer sealants to the latest in nano tech coating technology there have been many attempts at addressing the problems associated with plastic trim. Let's review the (2) generalized issues with a quick op-ed on the current status of solutions and then delve into why we haven't yet seen a true solution to issue #2. Next we will move forward into the interesting science behind Solution Finish and how it seeks to overcome the obstacles others have faced when it comes to restoration of faded trim. And finally we will get into the application, function, and real world results of Solution Finish with pictures, video and analysis followed by regular durability updates.
1.- Protecting new trim
In recent years we have seen huge advances in solving this one. There are a few products available now that do a good job of protecting new trim, leaving a non-greasy finish, and boasting many months of durability. But do they stop the trim from oxidizing? More on that later.
2.- "Restoring" old trim
While there are many products out that "dress" (temporarily darken) old faded trim by leaving a layer of some type of dressing nothing I have used actually restores the plastic. Now the main reason that matters to most people is as follows. Many of these old school products fall short in at least one of the following ways.
A.- Rain partially or completely washes them off of the plastic trim and/or leaves rain spots.
B.- While some don't noticeably wash off in the first few rains they do fade with each rain. Some last a week or two and a couple may even make it a month but in challenging conditions I haven't personally seen any make it beyond a few weeks without being seriously compromised.
C.- Greasy to the touch
D.- Are made of compounds that actually aid in the oxidation of your plastic trim and reinforce the vicious cycle of needing more dressing.
The Exception:
I would be negligent to act as if there is nothing that seriously darkens faded trim and lasts for months while leaving a dry to the touch surface. There is a coating (C4) made for trim that claims 1-2 years and is a good product but in my testing it began to fade within 5 months on the horizontal surfaces. While it still beads a little and the vertical surfaces are decent the fading on horizontals was very disappointing for the price. At 2.3X to 9X the cost of Solution Finish it’s very pricey and does not work on extremely faded plastic.
Why does trim fade and eventually turn chalky white:
We are all familiar with the affect sun has on surfaces and just like me you probably assumed the bleaching affect was the only reason trim becomes faded. During my research and thanks in large part to the time Chris West spent explaining the oxidation process of plastic I now have a better understanding of the full story. I learned a ton but will try to summarize just a few points in the interest of moving forward.
Manufacturing uses cheap fillers when creating plastic trim in order to save on cost. These fillers begin to break down soon after and as they do they emit peroxide gases. These gases in turn cause the oxidation and further speed the process of breaking down yet more of the surface.
To "fix" the faded trim in the past people have applied some type of dressing. As I touched on previously, many of the dressings used contain silicones that also react with the cheap fillers in the plastic, which once again speeds the oxidation and causes further fading.
The Solution?:
Solution Finish attempts to address faded trim on many of these fronts simultaneously. First the product works on an extremely small scale to penetrate down into the pockets and crevices that exist and were further created during the emission of the peroxide gas. Once there, Solution Finish basically re-impregnates the plastic on a nano scale with the high quality ingredients that the plastic manufacturers should have used in the first place.
There are also ingredients in SF to stop the oxidation by not allowing peroxide gas to form or react with the oxygen and UV rays.
Details:
1.- Packaging: Plastic Bottle
2.- Directions: Very simple
3.- Viscosity: Oily
4.- Color: Black
5.- Scent: Nuts? (Not very strong)
6.- Size: 1 oz. / 12 oz. / 32 oz. / Kits also available soon
7.- Price: $29.95 / $125.00 / $250.00 /
8.- Manufacturer: Solution Finish
9.- Made in: USA
Products used for prep:
1.- 50% IPA
2.- MF towels
Products used for application:
1.- Solution Finish
2.- Microfiber applicator
3.- Microfiber towel
Conditions:
Surface Temperatures:
Preparation, Application, and Noted Observations:
A.- Slightly Faded Trim
I wanted to really put SF to the test on completely whitened trim (more on that later) but my adventure and first application actually starts on the type of fading that you see on most vehicles.
On my lunch break I decided to do a little testing on my buddies vehicle. The trim was dirty but without access to water or my master blaster dryer it was straight to the SF DIY Kit I went. I retrieved the bottle of 50% IPA solution and after 2 quick passes (using a microfiber towel) I was ready to either apply SF or tape off the surrounding area first.
On the passenger side I masked one side of the trim. With a combination of the enclosed mf applicator and a foam swab I began to apply SF to the plastic running boards. My first observation was how far just a dab or two of product went. It goes on thin and spreads very easily. I had thought the trim was in decent condition and that SF wouldn't impress me much for this case but I was wrong. The difference was night and day!
On the drivers side I made the decision to get straight to it without taping. Once or twice I did overlap onto the paint but a quick wipe with IPA using an mf towel and I was once again moving forward.
After application I took a clean mf towel and completely buffed off the excess product. This is an important step. The excess buffs off easy and after finishing I flipped to a clean side to wipe once more just to be sure nothing else was coming off.
Total time spent on restoration was approximately 15 minutes per side.
Video: Application of Solution Finish
High Definition Option
Standard Definition Option
:dancebanana:
Sky's the Limit Car Care
-
Super Member
-
Super Member
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
C.- Application over the remnants of polymer sealants and Nano Coatings
After chatting with pops (Old Tiger) on the way home I decided to get back to it with some testing on my 1997 Saturn trim. In all fairness to Solution Finish I can't very well expect the way it acts over a nano coating to be indicative of its typical results, which was why I tested on other vehicles as well. But here we would be testing to see how it does actually perform over remnants of C4, Ultima Trim & Tire Guard, and Wolfgang ETS.
I applied C4 over these surfaces approximately 9 months ago. And 7 months ago I applied UTTG on a portion of the right side of the front bumper and WG ETS on a portion of the left. Interestingly enough over the following 7 months you can see from past reviews the C4 area faded much more than the area that had UTTG and ETS over the C4.
Anyway, these 3 products cannot be removed by any cleaners I have tried so now you understand why this is a different test. Here we will find if Solution Finish will penetrate through those products and also if durability will be affected. Based on what I understand to be the size of the particles in Solution Finish I tend to think it will penetrate through all 3 of these existing products.
You know how it is applied at this point so here's some pictures. Video was scrapped halfway through editing for now.
What if I get it on the paint?
SF states it will not stain protected paint and that masking off the surrounding area is optional. Furthermore they state that if you do accidentally spread product onto the painted area or glass you should simply remove it with a safe APC mix. I used IPA right away the few times I got some on the paint and had no issue.
In many cases it's just easier to stretch out a piece of tape so you can apply SF quickly without worrying about removing any over wipe, but for those that don't mask or didn't have tape that day I decided to put together a test.
Intentional Paint testing:
The following test focuses on 8 test sections. 4 sections have protection (OCW) on them and 3 sections have no protection. I applied SF directly to the paint on all 8 sections. On the first set I removed SF after 1 minute. On the second set I waited 10 minutes before removing SF. And on the third set I waited 30 minutes. On the final set I waited 5+ hours to remove the SF.
Each time I removed SF with 30% IPA and on the final section I used Eraser. I don’t have a white test panel so I worked with what I have. Here are the pictures.
Can I apply a sealant or coating over the top of it?
I think this product will work well with topper sealants because it penetrates into the plastic. As long as we can bond to the surface the restored plastic should still be beneath and not interfere. Long term testing will tell.
For this test I applied SF to 3 test pieces of trim. I then applied Opticoat, CQuartz, Ultima Trim & Tire Guard and C4 over the top of various sections as well as to a few sections on the front bumper of my 97 Saturn. On some sections I applied immediately after SF (probably not the way to go) and on some I applied after waiting longer than the full cure time. I also sprayed the surface of the cured sections with IPA before layering.
Unfortunately all pictures from the testing were inadvertently deleted. But the important part will be the durability shots to come later. I did snap a couple of new pictures tonight after no success at recovering the “during application test photos”. More pictures to come in updates of the sections on the front bumper.
Solution Finish directions:
Tips:
A.- Wear gloves and eye protection. Solution Finish will stain clothing and skin.
B.- Do not use on painted or glass surfaces; wipe off immediately with a clean applicator pad, terry cloth or Microfiber towel if solution gets on these areas. Use a paint safe cleaner if allowed to dry or as needed.
Application:
1.- Shake bottle well and apply a small amount to applicator pad or microfiber sponge.
2.- Spread a thin coat over area in an even motion, covering area completely.
3.- Allow Solution Finish to penetrate for at least 1-2 minutes.
4.- Use a clean microfiber towel to buff off excess.
After:
A.- For best results do not wash treated area for at least 4 hours.
B.- Applicator pads can be reused if stored in a sealed plastic bag.
C.- Store Solution Finish in a cool dry place away from heat or flame.
D.- Keep bottles tightly closed when not in use.
Additional:
In my opinion there is no need to rush buffing off the excess. I found I prefer to let it sit while I apply to all areas of trim before coming back to buff at the end. But of course when you do buff the excess be thorough. You can use a white mf towel as your final wipe to ensure no excess is left on the surface. In truth I don’t think it matters much as long as you leave it at least a couple minutes but it certainly doesn’t hurt so maybe it helps.
Pros:
1.- Restores: Faded Trim is darkened much deeper than just the surface
2.- Ease of use: Absolutely no issues in sun or shade
3.- Cleaners: Solvent based formula allows it to penetrate through light impurities and still bond
4.- Finish: Dry (Non-greasy) finish that doesn’t run from rain or water
5.- Durability: In testing (See Q&A #1) **6-8 months / 12-14 months**
6.- No Silicone
7.- Up-Sell: See suggested price list after Q&A
8.- Goes a long way: All the vehicles shown in my review were completed without making it through 3/4 of a 1 oz. bottle.
9.- Made in the USA
???
1.- Price: This will hinge on durability
2.- Durability: Testing in progress (See Q&A #1 and follow the upcoming updates)
Cons:
1.- Vulnerable to highly acidic cleaners (See Q&A #4)
2.- For best results apply at 40 degrees F or above.
Final observations and summary:
Solutions Finish Restore is extremely easy to use (bordering on fool proof). Its able to dissolve and clean many impurities while allowing the regenerative oils to penetrate the surface and microscopic cavities of the plastic on a nano scale so unlike coatings this product can be applied without fear of it not bonding. However a wipe down with IPA is always best practice.
It darkens and restores plastic trim and after removing the excess and allowing it to cure you are left with a completely dry finish. The ingredients within not only restore the plastic but also halt the formation of peroxide gas (stopping oxidation). With a price about 2.3 to 9 times cheaper than C4 this is going to be a must have if durability holds up for more than a couple months.
Severely faded trim can be further enhanced with a second coat. (See Q&A #2)
Ultimately durability will decide my final thoughts on this product but so far I'm impressed and the science sounds promising. With the plastic restored it also appears early in my testing you can coat it with the few top-notch sealants on the market to add additional UV protection and resistance to acidic solutions.
I'll be sure to keep the updates coming and also plan to add additional write-ups pitting Solution Finish side by side against the most well known trim restoration products.
Q&A with Chris West of Solution Finish:
Hi Chris, thanks so much for taking the time to educate me about Solution Finish as well as faded trim and plastic oxidation in general. Here are some additional questions I’ll post in the Q&A section of my review.
1.- How many months can we expect from Solution Finish in average conditions?
Well, believe it or not, the term "average conditions" is broader than you may think. The average conditions in California vary greatly from, let's say, North Carolina. But, without being coy, here's the answer to the question: An application of Solution Finish will last between 12-14 months. However, we've found that the average vehicle owner usually reapplies Solution Finish in 6-8 months just to freshen and keep it at optimum appearance.
2.- On severely faded trim will a second application darken the surface further? If so how long should we wait after buffing off the excess from the first application to apply?
OK, this is a little trickier -- but yes, a second application will darken the surface, especially when you have the much lighter "tiger stripes" you see occasionally. What I recommend is a first application without buffing off the excess, allowing it to set 4-6 hours, then apply the second coat and buff and remove the excess as directed.
3.- How long after buffing off excess from any application does the product need to dry or cure before it can be exposed to condensation or rain?
The longer, the better, naturally -- but the minimum time for drying or curing seems to be about 4 hours before exposure to condensation or rain. For demonstrations, I will apply Solution Finish and then immediately pour water on the part just to show the beading that occurs; then I will buff off the moisture with no ill effects.
4.- Is Solution Finish particularly vulnerable to any specific types of cleaners people may want to avoid?
We are continually testing in this area and to date have found that acetone and extreme de-greasers drastically affect Solution Finish's performance and durability. Not so much in California because of strict (green) regulations, but in many states car washes are allowed to use a foam pre-soak in drive-through and full service washes which has an acid-based composition that literally cleans by melting a layer of wax or clearcoat.
5.- Assuming the product is stored inside (temperature 70-80 deg. and humidity 45-60%) - What is the shelf life of an unopened bottle of Solution Finish?
Corey, let me answer #5 and #6 jointly. We just opened a 4oz bottle of Solution Finish after it sat in our warehouse for 26 months. I shook it vigorously for 30 seconds before opening, and found no change in performance. So, at this time, I would advertise 24 months to be the shelf life (to be on the safe side). Once the bottle is opened, I still will maintain there is a 24 month shelf life for the unused product. You can print our guarantee: Manufacturer offers "100% satisfaction guaranteed or your money back". If for any reason a customer is dissatisfied with the performance of Solution Finish, or if shelf life becomes an issue and the product spoils for any reason, the customer may return the unused portion and we will replace the bottle at no cost.
6.- Under the same conditions and assuming the cap is closed tight - What is the shelf life after the bottle has been opened?
See answer #5
7.- I noticed in the AG store web page they say for best results apply to a cool surface in the shade. I know that is rather standard but I tested Solution Finish in the sun as well and found no visible ill effects. Does application in the sun not allow the surface to darken as much as it would or affect the durability in some way?
Actually, Solution Finish likes a warmer surface rather than cold, so application in the sun only has a positive effect on the performance and durability. We have been told that in extreme cold conditions, let's say 40 degrees and below, it's not recommended to apply Solution Finish.
8.- I noticed on your website you say to allow the product to penetrate 1-2 minutes before buffing off the excess. I started in a similar manner but eventually started leaving it on the trim until I was completely finished with all trim before buffing it off. I found no visible ill effects and the excess still wiped off easily. What are the recommended minimum and maximum times to allow the product to penetrate the surface?
This one's easy -- I recommend waiting 1 or 2 minutes minimum before buffing off excess, but an hour or more after application, the excess will still buff off easily.
Suggested Price List:
Products:
1 oz.
12 oz.
DIY Kit:
Demo Kit:
Video: Kits & Available sizes
Special thanks to Chris West for providing me the product & tools as well as all the time he spent educating me on Solution Finish and oxidized plastic in general!
Special thank to all the readers for your time! Please post your thoughts and/or questions.
Special thanks to Bill for attempting to help me recover my deleted pictures.
Last edited by CEE DOG; 02-14-2012 at 11:03 PM.
:dancebanana:
Sky's the Limit Car Care
-
Super Member
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
Corey Once again You have outdone yourself!!!!
Looks like a good product....little pricey....but if the durability is really there In mind it would be worth the cost.
Thank you for your review Corey! And the time you put into it.....
Tim "I have done so much with so little for so long. Now I can do anything with nothing"
-
Super Member
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
Corey ... AWESOME
What an amazing review!
I hope that your Mini-van will let you follow up for a few months to see how things are going, that was a perfect candidate (it also looked like a good headlight restoration sale).
I am really trying to find some thoughtful and insightful question to ask but I think you covered all the bases, so I will just offer a bit more praise and thanks for all of your hard work and effort that went into this.
The C4 and SF combo looked amazing on your test pannel, I will be very interested to see how this holds up over time.
Looks like SF will be on my spring order :woo:
Sorry we couldn't recover all your pictures, but you know what to do in the future
-
Super Member
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
WOW!!! Corey I had to read through this review twice to make sure I got all of the information... You have outdone yourself again.
I'm surprised people aren't lined up at your door by now offering their vehicles as test subjects. It would beat have to go door to door...
-
Regular Member
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
-
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
Awesome...thanks! I'd been wondering about this product.
-
Super Member
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
Corey, only time will tell if Solution Finish is boom or bust, but one thing that is a proven fact is your ability to review a product. Excellent job!
"Tell Me What I Can't Do, and I'll Show You What I Can Do." ~Eugene
-
Re: Review: Solution Finish “Brings Black Back” (Trim Restoration Product)
Great review as usual!
That stuff has a great look to it afterwards, and seems it would go a long way with a very small amount.
Following their pricing guidelines, you would be "in the black" [pardon the pun] within 2 or 3 vehicles.
As an aside, how exactly would you push this? Would you sell it as an upcharge, or use it as a value added service for your more expensive detail packages?
Thanks again!
Similar Threads
-
By ViperGuy21 in forum Product Reviews
Replies: 20
Last Post: 06-06-2016, 07:56 PM
-
By Guyb in forum Product Reviews
Replies: 9
Last Post: 02-22-2016, 10:41 PM
-
By Pats300zx in forum Product Reviews
Replies: 11
Last Post: 12-29-2015, 02:04 AM
-
By Bryan@Autogeek in forum Product Reviews
Replies: 0
Last Post: 08-15-2013, 09:42 AM
-
By Nick McKees37 in forum Product Reviews
Replies: 24
Last Post: 01-26-2012, 10:12 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks