So I was able to get a hold of a 32oz bottle of 3D new ONE compound and finishing polish. This product is supposed to deliver true correction then with a simple pad swap become a top notch finishing polish.


I just had a black Dodge Challenger in the shop for a basic wash clay seal package and I thought this would be a great car to do a little test spot on being jet black paint and it having a fair share of swirls etc.


Here's the bottle. I will say it has a very pleasant aroma. Not sure of the smell but very nice.




Heres a spot completely stripped and ready to go. Pretty moderate amount of defects.




Directions state to apply 4-5 drops on a cutting pad and begin polishing. For this test I used my Rupes Duetto with a BOSS microfiber cutting pad. After about 4 passes I wiped off the product and noticed a little bit of marring which was expected. I did a Precoat wipe and it removed a little bit of filling to expose what was left after the first step. The product wiped off fairly easily. A bit smeary but not as much as some Menzerna products but a bit more than hyper polish is how I felt. But it could have due to the 4 drops and the amount of product for that little spot.


This is after compounding.




Now I normally finish polish with a Rupes yellow pad or a Rupes white. The instructions say to use a finishing pad but I wanted to see what a yellow would do. As suspected it left a tiny bit of marring after wiping down with precoat. So I switched to a Rupes white finishing pad and it finished out perfectly!

I have to say I kinda had my doubts but no muss no fuss it cut and finished out with ONE product. Obviously more testing is needed but so far it seems like a winner. And it's a good value!