Optimum Hyper Polish Spray With Long Throw Polisher?

[WRAPT C5Z06]

just be sure to do a good wipe down on a test spot with Gtechniq Panel Wipe or similar.

I like the ease of use of this panel wipe, but find it too strong on some paints, which creates hazing upon wipe off.



Sent from my iPhone using Tapatalk

[BudgetPlan1]

Interesting. Have used it a few times, was thinking of switching grom Gyeon Prep.

Did notice that when using it, need to work in smaller section as it seems to evaporate or haze if applied in too large an area.

With Gyeon or WG Prep, can hose down some pretty large sections with no apparent ill effects.

Gtechniq sure burns more than the others if you get it in a cut on your hand.

[WRAPT C5Z06]

Interesting. Have used it a few times, was thinking of switching grom Gyeon Prep.

Did notice that when using it, need to work in smaller section as it seems to evaporate or haze if applied in too large an area.

With Gyeon or WG Prep, can hose down some pretty large sections with no apparent ill effects.

Gtechniq sure burns more than the others if you get it in a cut on your hand.

I switched to Gyeon and like it better.

[RaskyR1]

I like the ease of use of this panel wipe, but find it too strong on some paints, which creates hazing upon wipe off.



Sent from my iPhone using Tapatalk

Yeah, it can be too strong for some painted plastic pieces and PPF. It definitely removes more than a lot of the other preps I've tried.

[RaskyR1]

Does Hyper Polish contain fillers or just allot of polishing oils?

As with any polish, the carrier oils have the ability to hide things like faint marring. A good panel wipe will remove them but I've found a lot of others not as effective with Hyper Polish. (Eraser, Opti-Prep, IPA)

Again, Hyper Polish is one of my most used finishing polishes, just stating what I and others have observed over the years.