-
Super Member
-
Super Member
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
The exception to the rule now days is there are cleaner/waxes available that use top notch abrasive technology that "yes" you can use them on 100% perfect paint without degrading the appeance or "working backwards".
which AIOs fall into this category?
-
Super Member
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
^^^ McKees 37 Jeweling Wax ^^^
Al Schmidt
"Adventure, is a car called Riviera..."
-
Super Member
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
Originally Posted by
BadgerRivFan
^^^ McKees 37 Jeweling Wax ^^^
I'll have to check that out. Do you think meguiars d301 would serve a similar function on a soft finishing pad? I have a bottle of it I've hardly used and was kind of looking for a use for it. I'll probably try it out in the next few days just to see.
-
Super Member
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
Originally Posted by
Finick
I'll have to check that out. Do you think meguiars d301 would serve a similar function on a soft finishing pad? I have a bottle of it I've hardly used and was kind of looking for a use for it. I'll probably try it out in the next few days just to see.
I'd say yes.
-
Super Member
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
Originally Posted by
Eldorado2k
I'd say yes.
Cool. I googled a bit and really couldn't find anything other than off hand mentions about the d301 being used on a foam pad vs the mf finishing discs, which was surprising. One of the only pictures I saw of it being done was from mike phillips working on some delicate paint. unsure of the specific car it was.
-
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
Originally Posted by
Finick
which AIOs fall into this category?
I'm happy to put together a list of the products I think qualify as jeweling waxes...
-
Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
Originally Posted by
Mike Phillips
Foam polishing pads
Also note how all the tools have foam "polishing" pads on them. Not foam finishing or foam cutting, but foam "polishing" pads. I don't pretend to maintain a "Show Car Finish" on my truck. It's a truck. It sees a lot of normal wear-n-tear. I don't mind a few deeper swirls and scratches. Moving forward into the future it's going to see MORE wear-n-tear and get more swirls and scratches. So I keep m sanity by realizing all of this and instead of aiming for perfection I aim for shiny. Shiny swirls? You bet. It's a truck, not a show car.
Mike - this paragraph made me realize i am aiming too high for my car which is a daily driver. Thank you!
-
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
Originally Posted by
AKT
Mike - this paragraph made me realize i am aiming too high for my car which is a daily driver.
Thank you!
Your welcome.
I’d say most people with daily drivers are aiming too high, not that that’s a bad thing but reality is daily drivers see future wear-n-tear.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
AKT thanked for this post
-
Re: Review: Meguiar's D166 Ultra Polishing Wax by Mike Phillips
How is the D166 compared to meguiars M66? Both are cleaner wax but which will perform better?
Bookmarks