How to use the Flex 3401 for Show Car Detailing
How to use the Flex 3401 for Show Car Detailing
http://www.autogeekonline.net/galler...php?file=83320
On Autogeek.net
How to use the Flex XC 3401 VRG Dual Action Polisher
For both Production Detailing & Show Car Detailing
The below streetrod was corrected, polished and machine waxed using the techniques shared in this how-to book.
I think everyone will agree that this 1941 Chrysler is a show car. It's definitely doesn't fall into the same category as a daily driver.
I also think everyone will agree that a show car like this deserves a show car finish.
That being true... then these swirls need to go....
Frame-up shot...
http://www.autogeekonline.net/galler...php?file=83704
Close-up of the same above frame-up shot...
http://www.autogeekonline.net/galler...php?file=83705
Frame-up shot...
http://www.autogeekonline.net/galler...php?file=83706
Close-up of the same above frame-up shot...
http://www.autogeekonline.net/galler...php?file=83707
Frame-up shot...
http://www.autogeekonline.net/galler...php?file=83708
Close-up of the same above frame-up shot...
http://www.autogeekonline.net/galler...php?file=83709
Frame-up shot...
http://www.autogeekonline.net/galler...php?file=83710
Close-up of the same above frame-up shot...
http://www.autogeekonline.net/galler...php?file=83711
Frame-up shot...
http://www.autogeekonline.net/galler...php?file=83712
Close-up of the same above frame-up shot...
http://www.autogeekonline.net/galler...php?file=83714
Close-up of the same above frame-up shot...
http://www.autogeekonline.net/galler...php?file=83715
Close-up of the same above frame-up shot...
http://www.autogeekonline.net/galler...php?file=83716
:)
Re: How to use the Flex 3401 for show car detailing
Re: How to use the Flex 3401 for Show Car Detailing
Incredible work as always Mike! That Chrysler explodes with vibrancy, gloss, and depth now!
Cant wait to get my hands on this book! Im sure its packed to the brim concerning everything about the 3401.
Re: How to use the Flex 3401 for Show Car Detailing
Re: How to use the Flex 3401 for Show Car Detailing
I love this and I love the Flex 3401. It is a BEAST! I also purchased your new how to book on the Flex and was surprised that you took time to actually write something in it besides just your signature. Thanks! While I havent been able to read it front to back yet, I will say it is very well written for just skimming through it.
Re: How to use the Flex 3401 for Show Car Detailing
Quote:
Originally Posted by
Mike@DedicatedPerfection
Incredible work as always Mike! That Chrysler explodes with vibrancy, gloss, and depth now!
Thanks Mike, always appreciate the comments and feedback.
Quote:
Originally Posted by
Mike@DedicatedPerfection
Cant wait to get my hands on this book! Im sure its packed to the brim concerning everything about the 3401.
I left no stone unturned....
I'm also hand numbering the first 100... I did that or my last book too. I always meet guys that say something like,
I have #53
:xyxthumbs:
[quote=Caleb@ImpeccableImage;1180893]
I love this and I love the Flex 3401. It is a BEAST!
I also purchased your new how to book on the Flex and was surprised that you took time to actually write something in it besides just your signature.
Thanks!
Ha ha... you're right... when I went to start signing these books I wanted to include something I felt was true and accurate about the tool and personal at the same time and I can tell from your post that you do in fact already have a copy.
Quote:
Originally Posted by
Caleb@ImpeccableImage
While I haven't been able to read it front to back yet, I will say it is very well written for just skimming through it.
Thank you very much, I appreciate this type of feedback. A lot of thinking goes into writing and most of the pictures I took myself.
And except for the pictures Yancy included, (I call these "fluff shots"), except for those shots I also buffed out all of the cars in the book too.
I think there's a profound difference between books written by writers that "interview" people for the subject matter of their book and writers that actually do the thing they do and teach in a book.
:xyxthumbs:
Re: How to use the Flex 3401 for Show Car Detailing
thanks for sharing Mike.
always a pleasure reading and learning from your posts. :)
Re: How to use the Flex 3401 for Show Car Detailing
Awesome book Mike, I haven't finished reading it yet, but there is some really good information in it , including the Lake Country FLEX XC3401 Changeable Backing Plate System, and which pads to use. Thanks Mike!
I have #9:xyxthumbs:
Re: How to use the Flex 3401 for Show Car Detailing
Another great book Mike! Packed with high-res pics, step-by-step instructions, product recommendations and best practice techniques and procedures. Love your "Mike's comments" and showing difference between a squirrel and swirl. :dblthumb2:
Re: How to use the Flex 3401 for Show Car Detailing
Quote:
Originally Posted by
Mizzoutiger
Another great book Mike! Packed with high-res pics, step-by-step instructions, product recommendations and best practice techniques and procedures.
Love your "Mike's comments" and showing difference between a squirrel and swirl.
:dblthumb2:
Thank you for the nice comments...
Most of the cars in the book I personally detailed using the Flex 3401. There's a few what I call "Fluff Shots" that Yancy inserts that are just beauty shots of cars he's taken pictures of to add color to a page.
The Squirrel and Swirl article is probably one of the most fun or popular articles I've ever written because it's funny and it's funny because it's true.
This book was very well received at SEMA I'm happy to say... I signed dozens of copies including a copy for John D'Agostino....
:)
Re: How to use the Flex 3401 for Show Car Detailing
Any chance this will be coming out in an ibook?
Re: How to use the Flex 3401 for Show Car Detailing
Very nice work Mike! The "indoor-no-flash" after shots are just jaw dropping! :xyxthumbs:
Re: How to use the Flex 3401 for Show Car Detailing
Great job on the correction.
Those flame are absolutely INCREDIBLE, props to the painter..
Re: How to use the Flex 3401 for Show Car Detailing
Quote:
Originally Posted by
SilverRebel
Any chance this will be coming out in an ibook?
Best thing to do is just get the paperback version. No time-table for turning it into an ibook.
Quote:
Originally Posted by
davey g-force
Very nice work Mike! The "indoor-no-flash" after shots are just jaw dropping! :xyxthumbs:
Thank you. I've worked pretty hard on my photography skills over the last 13 years of sharing my work on discussion forums. Besides writing articles on how to detail cars I also write articles on how to take pictures and make them show up in a thread on a forum.
How to photograph and capture swirls in the sun
How-To capture swirls, scratches, etchings and other surface defects with your camera
Let there be light...
(when inspecting the condition of your car's paint)
Quote:
Originally Posted by
LRC3
Great job on the correction.
Thank you. When I was growing up I bought all the books on the market on car detailing and car painting and to be honest I don't ever remember learning anything in the book that actually helped me when I went out to the garage to work on a car. So I try to write in a way that actually helps people.
I also do all my own work. I don't sit back and type about how to detail cars, the cars I use in my how-to books are cars I have personally detailed.
Quote:
Originally Posted by
LRC3
Those flame are absolutely INCREDIBLE, props to the painter..
I agree.
:)
Re: How to use the Flex 3401 for Show Car Detailing
Just curious, when would you use a buffer such as a Makita instead of the Flex 3401?
Re: How to use the Flex 3401 for Show Car Detailing
Quote:
Originally Posted by
Richardt929
Just curious, when would you use a buffer such as a Makita instead of the Flex 3401?
Hi Richard,
I use rotary buffers all the time. It just depends on what I'm trying to do. Over the weekend I buffed out a brand new 2015 Ferrari 458 Spyder and for this car I used a simple Porter Cable 7424XP.
This Sunday as a part of my detailing boot camp class I'll be showing people how to,
Block sand by hand
Wet sand by machine
Use rotary buffers to remove sanding marks
Use Flex 3401 to remove swirls left by wool pad on rotary buffer
Machine apply wax using Porter Cable 7424XP
Here's their training car....
http://www.autogeekonline.net/galler...php?file=94247
So it's all about using the right tool for the job. I still have my original Makita Rotary Buffer I purchased back in 1987 and used it till the gears wore out. I keep it around now days to show people in my classes how I wore the sand cast aluminum smooth like chrome from buffing out hundreds, possible thousands of cars.
I don't know of anyone else that has a rotary buffer that has wear marks like mine. I'm not saying they don't exist I've just never seen anyone post pictures of a rotary buffer they've used so much they have these types of wear marks.
http://www.showcargarage.com/gallery...sofbuffing.jpg
http://www.showcargarage.com/gallery...sofbuffing.jpg
If a person wants to learn how to use a rotary buffer it's a good idea to learn from someone that has used one.
:xyxthumbs:
Re: How to use the Flex 3401 for Show Car Detailing
Wow, that rotary has seen some use for sure!
I'm pretty sure Ive seen some photos posted by Joe (Superior Shine) that show a rotary or two with similar external wear. :)
Re: How to use the Flex 3401 for Show Car Detailing
Quote:
Originally Posted by
davey g-force
Wow, that rotary has seen some use for sure!
I wore this polisher out from buffing out hundreds and even thousands of cars. I fed myself and my family with this Makita rotary buffer.
Right now it's on display in my office. I pass it around in all my classes for my students to see and inspect first hand.
Then I tell them,
"If your going to take a detailing class on how to use a rotary buffer it's a good idea to take a class from someone that's actually used one."
You come to one of my ACR 3-day classes and I'll show you how to make a rotary buffer dance on the paint.
:)
Re: How to use the Flex 3401 for Show Car Detailing
That's a beautiful car and great work Mike. Just curious, how does a show car like that get swirls and holograms ? TIA
Re: How to use the Flex 3401 for Show Car Detailing
Quote:
Originally Posted by
parshooter
That's a beautiful car and great work Mike.
Just curious, how does a show car like that get swirls and holograms ? TIA
Great question and the answer is the same old answer that haunts detailers since car detailing was invented...
Lack of knowledge is probably the largest contributor to swirled out show cars. I've been writing how-to articles for the Internet world since 1994. That's 21 years. But not everyone that polishes and waxes cars get on the Internet.
Next would be lack of proper tools, pads and products. Technology has changed and is changing FASTER than anyone can keep up with unless they're on a forum like this.
I'd say it's the combination of the above two factors, knowledge and tools.
Good question.
:)
Re: How to use the Flex 3401 for Show Car Detailing
Does the book show how to oil the 3401. Thought there was a video out there showing that. Or did i miss that in this thread
Re: How to use the Flex 3401 for Show Car Detailing
Re: How to use the Flex 3401 for Show Car Detailing
Great article, extremely useful info!
Re: How to use the Flex 3401 for Show Car Detailing
Thanks Mike for sharing all these information and congratulations for your great effort in bringing out these books. Most of my doubts are cleared after going through your book.
Re: How to use the Flex 3401 for Show Car Detailing
Quote:
Originally Posted by
Anthony A Bobo
Thanks Mike for sharing all these information and congratulations for your great effort in bringing out these books. Most of my doubts are cleared after going through your book.
Thank you for the kind words... Polishing paint ant showing others hot to do it is what I do.
I don't steal other guys work and present it as my own but instead do my own work and create my own information resources. I give due credit to those to whom it is due even when I see my own work stolen without credit.
I walk the walk.
:)
Re: How to use the Flex 3401 for Show Car Detailing
Good going Mike. Keep on bringing out such informative books.
Re: How to use the Flex 3401 for Show Car Detailing
Amazing work! I am happy to found your post.