Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Originally Posted by Gnarboots11
These are my favorite pads to use. I absolutely hate the LC CCS pads because I feel like im getting no product on the car, it's all going into those stupid dimple things on the pads and the friggin PC can't even spin them. Also, the fact that the LC CCS pads are larger and therefore cover more area and therefore make polishing quicker doesn't seem to be true. From my experience the LC CCS 6.5" pads just end up lifting up on the edges off the paint so in reality, the pad is covering just as much area as the small low profile pads. Those 6.5" LS CCS pads just seem to be a big waste of product.
Yea, I was going to say the same thing and I find that using the 5inch or so, I actually work faster...but that could be my imagination
-
Super Member
Originally Posted by Nica
Yea, I was going to say the same thing and I find that using the 5inch or so, I actually work faster...but that could be my imagination
do they fit right on the standard backing plate that the pc comes with?
~Lulu~
-
Super Member
It should fit the backing plate Lauren, I just can't recall what size the backing plate was on the PC..um..5inch? I'm almost certain it was 5inch. Anywho if it is 5inch the 5 and a 1/4 inch pad will fit just fine on a 5inch backing plate...well works fine with my 3M backing plate.
I've even used the Lake Country pads for the Cyclo on my rotary works great...me like
-
Super Member
Where do you order the low profile pads ?
2013 Infinity JX35 White Pearl, 2009 BMW 528XI White
1969 Primrose Yellow 4.2 XKE
2002 Ford F-350 Powerstroke 7.3
-
Super Member
I got them for free when I ordered my PC. U might be able to order them by themselves. Call Meghan, she will be able to help.
-
Super Member
-
Super Member
I want some of these real bad, if anyone isn't using the ones that AG sent them free in a package please let me know.. I'll try to make it worth your while
Lauren, if you aren't using yours and want to throw them in with the PB's olet me know and I'll make it worth your time
www.deep-gloss.com
Deep Gloss Auto Salon / Fine Automobile Detailing - Metro Detroit's Paint Correction Specialist
For Discriminating Automobile Enthusiasts Who Demand The Best
South East Michigan Automotive Detailing - Rochester Hills, Troy, Bloomfield Hills, Birmingham, Farmington Hills, South Lyon, West Bloomfield, Ann Arbor, Grand Rapids, Brighton, Grosse Point, Shelby Twp, Utica, Beverly Hills, Berkely, Walled Lake, Livonia, Novi, Wixom, Waterford, Clarkston
-
Super Member
Originally Posted by MotorCity Honda
I want some of these real bad, if anyone isn't using the ones that AG sent them free in a package please let me know.. I'll try to make it worth your while
Lauren, if you aren't using yours and want to throw them in with the PB's olet me know and I'll make it worth your time
Jason, After this tried mine on the vette and found it worked much better. I ended up buying that pack of white and orange - got it last week, so I have to pass; I am sorry!
There may be others who do not want theirs. ????
~Lulu~
-
Super Member
Originally Posted by ltoman
Jason, After this tried mine on the vette and found it worked much better. I ended up buying that pack of white and orange - got it last week, so I have to pass; I am sorry!
There may be others who do not want theirs. ????
No Problemo Senorita!!
Just out of curiosity, what pads were you using before?
www.deep-gloss.com
Deep Gloss Auto Salon / Fine Automobile Detailing - Metro Detroit's Paint Correction Specialist
For Discriminating Automobile Enthusiasts Who Demand The Best
South East Michigan Automotive Detailing - Rochester Hills, Troy, Bloomfield Hills, Birmingham, Farmington Hills, South Lyon, West Bloomfield, Ann Arbor, Grand Rapids, Brighton, Grosse Point, Shelby Twp, Utica, Beverly Hills, Berkely, Walled Lake, Livonia, Novi, Wixom, Waterford, Clarkston
-
Super Member
Originally Posted by MotorCity Honda
No Problemo Senorita!!
Just out of curiosity, what pads were you using before?
The 6.5 LC, slowly changing over to the LC CCS 6.5 pads. The cut is good on the low profile....had no idea until I got one and asked and then tried it. With the vette I need all the cut I can get, but Kllr warned me no yellow pads on the vette. I figure he would know...
~Lulu~
Similar Threads
-
By VISITOR in forum Wool & Foam Buffing Pads
Replies: 15
Last Post: 06-29-2015, 07:20 AM
-
By stibuki in forum Flex Polishers
Replies: 10
Last Post: 11-13-2012, 08:36 PM
-
By WRAPT C5Z06 in forum Auto Detailing 101
Replies: 19
Last Post: 02-03-2011, 08:02 PM
-
By O.C.Detailing in forum Customer Comments
Replies: 0
Last Post: 01-31-2010, 12:27 PM
-
By Mr Dream Machines in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 0
Last Post: 08-17-2007, 03:00 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks