Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Whats funny is that it seems like AG is trying to get rid of these pads, but these are MY FAVORITE PADS!!!!
I use them for cutting as I feel they work better than the other pads out there. Personally Im not a big fan of the new CCS pads, I feel they waste product and are too thick. (I know they are made to SAVE product)
-
Super Member
Originally Posted by FMINUS
Whats funny is that it seems like AG is trying to get rid of these pads, but these are MY FAVORITE PADS!!!!
I use them for cutting as I feel they work better than the other pads out there. Personally Im not a big fan of the new CCS pads, I feel they waste product and are too thick. (I know they are made to SAVE product)
Funny..I have the 5" CCS pads and the Low Profiles.... same foam..just a different design...both from LC....both work close to the same...and the 5"s are not much thicker than the low profiles...
Al
-
Super Member
Also WG pads are LC made pads.
-
Super Member
ya they cut great...the foam seems a little more brittle tho..i tore 2 small parts off to pads on one car
-
Super Member
Originally Posted by Thejoyofdriving
well the LC ones dont come apart, i just like pads that last more than 3 hours of use.
They are LC pads. Are you pretty rough on stuff when you detail?
~Lulu~
-
Super Member
Originally Posted by Surfer
I have one if you want it? I'll send it with your wire in the package. Mine came in an order long time ago but I don't use backing plate pads. Think it was an Wolfgang pad?
I just now saw this Surfer. I appreciate your offer but I got two orange ones with some Menz polishes so I'm set. Thank You though.
-
Super Member
-
In time out
Lauren, are you talking about the regular LC 5.5" pads? I LOVE 'EM! I have a 6.5" as well, but unlike some things in life, I don't think bigger is better when it comes to pads. It works great on the 5" backing plate and doens't flapall over the place.
-
I love the pads as well. They are what I used with SIP to remove the swirls on my car. They worked better than the regular 6.5" LC orange pad, and also the yellow pad because they don't leave the hazing. They are also easier with cleanup because they aren't so thick.
-
These are my favorite pads to use. I absolutely hate the LC CCS pads because I feel like im getting no product on the car, it's all going into those stupid dimple things on the pads and the friggin PC can't even spin them. Also, the fact that the LC CCS pads are larger and therefore cover more area and therefore make polishing quicker doesn't seem to be true. From my experience the LC CCS 6.5" pads just end up lifting up on the edges off the paint so in reality, the pad is covering just as much area as the small low profile pads. Those 6.5" LS CCS pads just seem to be a big waste of product.
Similar Threads
-
By VISITOR in forum Wool & Foam Buffing Pads
Replies: 15
Last Post: 06-29-2015, 07:20 AM
-
By stibuki in forum Flex Polishers
Replies: 10
Last Post: 11-13-2012, 08:36 PM
-
By WRAPT C5Z06 in forum Auto Detailing 101
Replies: 19
Last Post: 02-03-2011, 08:02 PM
-
By O.C.Detailing in forum Customer Comments
Replies: 0
Last Post: 01-31-2010, 12:27 PM
-
By Mr Dream Machines in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 0
Last Post: 08-17-2007, 03:00 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks