Thanks: 0
Likes: 0
Dislikes: 0
-
Just got PC 7424 (Need Help)
I got this because first machine I tried was lacking power. Well so far it has all the power I need for a DA.
But have a few questions and problems.
#1 Tried #83 and anything above Speed 5 and I can't see any polish after a few seconds. It seemed to just disapear.
On lower speeds I can see the product and all the stages it is at including breaking down but once I hit speed 6 just see nothing at all and seems to just dispear instantly.
#2 After using the PC I find the panel gets very warm compared to the previous machine I was using, is this normal for the panel to get very warm.
#3 Even with #80 on Speed 6 I am also finding it very hard to see the product at all and with other machine I used I could see this no problem and saw exact moment it broke down but again speed 6 seems to just either break it down straight away or not allow it to break down.
#4 I have tried regular lighting in garage and also halogen and can't seem to see the polish at all and it is a little to easy to remove even after 1minute where with the other machine if I didn't break it down long enough it would be pain to remove but this after 1 minute seems to be no polish at all to remove and what ever polish I can see comes off instantly.
It is cleaning up alot of marks but still some very light marks which still remain which I feel #83 can remove if I can work it in proply but also need all the power to remove marks.
I have tried both clean dry pads with a x and also two little dabs so it not because there is not enough product.
Similar Threads
-
By cleanfreak3 in forum Griot’s Garage Polishers - BOSS - 6" DA - 3" DA
Replies: 8
Last Post: 04-27-2016, 08:14 PM
-
By rdfkentucky in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 4
Last Post: 06-27-2012, 11:35 PM
-
By UltimateDetail in forum Ask your detailing questions!
Replies: 14
Last Post: 10-19-2011, 02:19 PM
-
By bmann in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 2
Last Post: 06-05-2009, 04:20 PM
-
By sixgun95 in forum Motorcycle Care
Replies: 9
Last Post: 03-10-2006, 02:58 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks