Need help with results from XMT

[bambo2888]

Well, I went through the XMT line and process beginning with the orange pad and no. 2 swirl remover. I still have some marks like the deeper spider lines remaining. Do you guys recommend stepping up to the intermediate swirl remover and a yellow pad?

[justin_murphy]

How long are you letting XMT2 work and break down?

Any pics available?

Are you using pressure?
You need to use enough just to bog the PC down at a #5 setting and then back off a little. Work only a 2 foot by 2 foot area.

Have you watched the PC videos here?

Let us know.....

[ScottB]

Justin's got the right line of attack. Polishing time ?? Pad choice ?? It all helps as there is no fast and miraculous way with a PC to correct paint.

[trhland]

ya thats the key work it intill it almost breaks down then wipe it off

[bambo2888]

I worked the xmt2 in for 6 minutes each time for three times. I just went to take a few pics and the camera battery crapped out, so give me 15 minutes and I'll have some pics up of what Im talking about.

[trhland]

if that doesnt work you might want to bump up to a stronger polsh. but still use the same pad

[bambo2888]

BEFORE:



AFTER:




As you can see, there are still a few small scratches that I want to remove...

[trhland]

polish and a medium cut pad should take them out no prob. if not move up to a stronger polish

[bambo2888]

any reason I shouldn't bump up pads?

[trhland]

what are you useing now orange lakecountry pad??