Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: Stick Handle - Hoop Handle - Or no handle at all?
Yikes!
Ford is bringing back the SHO though! Those SHO's were great cars!
Glad your okay, that was a nasty wreck!
Aaron's the name!
Live long and prosper Leonard Nimoy
-
Junior Member
Re: Stick Handle - Hoop Handle - Or no handle at all?
Originally Posted by Mike.Phillips@Autogeek
DA Polishers - Stick Handle - Hoop Handle - Or no handle at all?
Just posted a thread on the same subject here
Rotary Buffers - Stick Handle - Hoop Handle - Or no handle at all
but wanted to start a dedicated thread for the PC style polishers too...
The Porter Cable unit comes with stick handles, the G110 comes with a Hoop Handle and the Griot's Garage comes with a Hoop handle,
Anyone have any preferences?
I never use the handles myself and in the case of the stick handle, on some cars if you're buffing some curves you an actually put yourself in a position where the handle could touch and scar the paint.
For Newbies, the hoop handle helps them to keep their pad flat because the handle positions their hand directly over the head of the polisher. Newbies to machine polishing will tend to buff crooked when first starting out because they'll place more pressure on the handle side of the polisher and this ends up with their pad on edge. This leads to a lack of rotating of the buffing pad, so I've found it's better to remove the stick handle when teaching someone new to polishing how to use the PC style polishers.
So my personal preference is to take the handle off use it without it, I think most people that try this never look back...
What say you?
I will have to leave the handle off next time and see how that works for me. You actually make it look easier to maneuver without the handle.
Mike
Why do we drive on a Parkway, and park on a Driveway George Carlin
-
Super Member
-
Super Member
Re: Stick Handle - Hoop Handle - Or no handle at all?
I like the hoop handle on my Griot's, helps me keep the pad flat & I have a hook built for my ladders so I can hang it when wiping. I can still easily hold it without using the handle but yes sometimes the handle does get in the way.
"Labor is prior to, and independent of, capital. Capital is only the fruit of labor, and could never have existed if labor had not first existed. Labor is the superior of capital, and deserves much the higher consideration." Lincoln's First Annual Message to Congress, December 3, 1861.
Newport, Oregon USA!
-
Re: Stick Handle - Hoop Handle - Or no handle at all?
Whoops!
Sorry everyone I didn't add the words DA Polisher: to the beginning of the title of this thread and then wrote a similar title for the rotary buffer without adding, Rotary Buffer: to the beginning of it.
So the threads look like the same thread.
I actually saw my mistake and edited the titles to reflect the differences but the limit for editing the title of a post had already passed so the edit didn't take.
I've asked Jason to tweak the time limit so I can try again.
Sorry... typing too fast, thinking too slow...
-
Re: DA Polisher: Stick Handle - Hoop Handle - Or no handle at all?
I am going to make my first try with my DA. Will try it with no handle.
-
Super Member
Re: Stick Handle - Hoop Handle - Or no handle at all?
Originally Posted by SRHTX
Hmmmmmm..... I will not make a comment about that. I should have been way up in the sky with him up there.
BEFORE:
AFTER:
I miss that ol V8 SHO.
Wow Stephan I just noticed this. That Dodge hit you so hard it knocked the color right off of that ol red V8 SHO
[SIGWe PIC][/SIGPIC]“
We are what we repeatedly do. Excellence, therefore, is not an act, but a habit. -Aristotle
MAY THE SHINE BE WITH YOU
-
Re: DA Polisher: Stick Handle - Hoop Handle - Or no handle at all?
pc--no handle
flex--handle
-
Super Member
Re: Stick Handle - Hoop Handle - Or no handle at all?
Originally Posted by Rsurfer
If he hit you on the driver side with the same impact you wouldn't be here.
You're angel was there that day!
:dancebanana:
Sky's the Limit Car Care
-
Super Member
Re: DA Polisher: Stick Handle - Hoop Handle - Or no handle at all?
no handle on the PC, two screws go on each side to keep from rattling...
Similar Threads
-
By Mike Phillips in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 12
Last Post: 04-24-2019, 06:55 AM
-
By Mike Phillips in forum How to articles
Replies: 11
Last Post: 04-24-2019, 06:53 AM
-
By SuperGlide in forum Rotary Buffers
Replies: 4
Last Post: 09-11-2013, 01:26 AM
-
By 05xrunner in forum Off-Topic
Replies: 47
Last Post: 04-22-2012, 09:42 AM
-
By CrownKote in forum How to make money detailing cars
Replies: 63
Last Post: 09-18-2011, 06:11 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks