Has Anyone Tried the Foamed Wool pads?

**makdaddy626** · 11-02-2007, 02:32 PM

Has anyone tried these pads with a PC? What would be their best use?

Foamed Wool 6.5 inch Polishing/Buffing Pads

**Bonifax** · 11-02-2007, 03:14 PM

Originally Posted by makdaddy626

Has anyone tried these pads with a PC? What would be their best use?

Foamed Wool 6.5 inch Polishing/Buffing Pads

I guess you could use them with Menz Power Gloss or something like that to remove serious defects.

**DantheMan** · 11-02-2007, 03:25 PM

Never tried it with the PC. Personally dont think it would work very well. I use it on just about every correction I do with the rotary though.

**joe.p** · 11-02-2007, 03:32 PM

Talk with AL-53 he's used the LC wool/foam pad a few times.AL also used the Edge wool pad ..IIRC he stated they were top notch..

**Al-53** · 11-02-2007, 04:53 PM

The Foam wool pads are a great pad...will do correction to final polishing ..depends on the product....I got one to try and then bought 3 more...just remember to spur it on each panel and you will get better results...

I really like the pad....does alot for one pad...

AL

D · 11-03-2007, 12:36 AM

LC foamed wool is pretty damn cool. Havent used it on the PC though.

**Al-53** · 11-03-2007, 08:00 AM

Originally Posted by D&D Auto Detailing

LC foamed wool is pretty damn cool. Havent used it on the PC though.

I do not think you will get full advantage of the foamed wool on a PC like on a rotary ...

But on a Rotary they are very good....to me its a must have pad....I have used it with SIP to PO85Rd and it works great with them...

AL

**Bonifax** · 11-03-2007, 10:16 AM

Check [ame="http://video.google.com/videoplay?docid=6351668595470986061"]this[/video]

**Ong~Bak** · 11-03-2007, 10:31 AM

The foamed wool pad is all I use now with UDM and Menzerna PO 106FF, PO85RD,
the results are unmatched by foam pads, this is my finding on it.

I also use the LC leveling wool pad with Menzerna Power Gloss Compound
I can do in one pass what takes foam 2-3 passes to do.

**lethalxls1** · 11-20-2007, 05:24 PM

would a wool pad work well with xmt medium swirl remover and a PC? I have a clearcoat paint job and the orange pad just isnt enough. Would a yellow pad be worth a shot?