Thanks: 0
Likes: 0
Dislikes: 0
-
7424 & m101
how would m101 work with the porter cable 7424xp with thin 5.5 foam pads
-
Super Member
Re: 7424 & m101
Probably very well. I hear M101 has a lot of cut.
I use a lot of Ultimate Compound, and M100 using green buff and shine grip pads. They do all do a fantastic job!
-
Super Member
Re: 7424 & m101
Originally Posted by dlc95
Probably very well. I hear M101 has a lot of cut.
I use a lot of Ultimate Compound, and M100 using green buff and shine grip pads. They do all do a fantastic job!
I honestly have been using M100 with a standard 8mm DA polisher paired with buff & shine's flat 5.5 inch white, orange, or yellow euro-foam pads (based on paint hardness) as my go-to 1-step for the past two years. I honestly didn't believe M101 could possibly have more cut and finish better. But the last few months I've been using it with Meguiar's thin burgundy cutting discs and it truly does cut FAR more than M100. The only other compound (other than scholl's s0 matting compound) that can actually come close to matching M101 in cut, is Menzerna SHC 300 which is a bit more expensive and leaves a noticeable haze. If m101 didn't smell worse that FG400 and cost twice as much as m100, it would my primary compound. It's that good.
So to answer your question, it will cut EXTREMELY well, even with the PC7424. Especially with the 3.5 inch and 5.5 inch pads
-
Super Member
Re: 7424 & m101
It will do great so long as you enjoy the 7424 and keep it rotating. Add in a MF Pad instead of foam and it will cut through anything fast and safe leave a nice really good finish, only a very minor haze and is really easy to remove. It will dust a little though.
M101 is my go-to compound on rough cars.
Did use a 7424 on this but it was with M101 and Griot's MF Pads:
More Pics here: 2016 Chrysler 300 AWD by PDQS4 | Photobucket
2019 Pearl White Accord 2.0T Touring (mine)
2023 Snowflake Pearl White CX-30 Turbo Premium Plus(wife)
2010 Urban Platinum Metallic CRV EX-L & 2014 Mica Black Metallic Toyota Corolla S (kids)
-
Super Member
Re: 7424 & m101
Originally Posted by mwoywod
I honestly have been using M100 with a standard 8mm DA polisher paired with buff & shine's flat 5.5 inch white, orange, or yellow euro-foam pads (based on paint hardness) as my go-to 1-step for the past two years. I honestly didn't believe M101 could possibly have more cut and finish better. But the last few months I've been using it with Meguiar's thin burgundy cutting discs and it truly does cut FAR more than M100. The only other compound (other than scholl's s0 matting compound) that can actually come close to matching M101 in cut, is Menzerna SHC 300 which is a bit more expensive and leaves a noticeable haze. If m101 didn't smell worse that FG400 and cost twice as much as m100, it would my primary compound. It's that good.
So to answer your question, it will cut EXTREMELY well, even with the PC7424. Especially with the 3.5 inch and 5.5 inch pads
M101 smells worse than FG400?
Yikes!
-
Re: 7424 & m101
I agree.
Both M100 and M101 are very good compounds no matter what the tool.
They both use very good abrasive technology, the most important factor when polishing paint plus they have long working times and low dusting characteristics.
When it comes to wool pads on a rotary buffer M100 is top notch.
-
Re: 7424 & m101
Originally Posted by jverhoff2012
how would m101 work with the porter cable 7424xp with thin 5.5 foam pads
Just be sure to do a test spot first and be prepared to do a follow up polishing step to insure no haze left by the compounding step. I would not recommend M205 but take a look at any fine cut polish in the SONAX brand like any of these,
SONAX Cut & Finish
SONAX Cut & Finish
Sonax Profiline Nano Polish 3/6, sonax nano polish, sonax perfect finish, sonax profiline cut finish
If you go this route, please post a follow-up as to your results and experience.
Also since this was your first post to the AGO forum...
Welcome to AutogeekOnline!
-
Re: 7424 & m101
M100 is nice, but compared to Zephir and M101 it feels like medium compound.
https://www.instagram.com/p/BPe8QzQBonA/
-
Super Member
Re: 7424 & m101
Originally Posted by Mike Phillips
Just be sure to do a test spot first and be prepared to do a follow up polishing step to insure no haze left by the compounding step. I would not recommend M205 but take a look at any fine cut polish in the SONAX brand like any of these,
What makes you not recommend M205?
2019 Pearl White Accord 2.0T Touring (mine)
2023 Snowflake Pearl White CX-30 Turbo Premium Plus(wife)
2010 Urban Platinum Metallic CRV EX-L & 2014 Mica Black Metallic Toyota Corolla S (kids)
-
Re: 7424 & m101
good cut, good finish, lots of dust
Similar Threads
-
By Zubair in forum Auto Detailing 101
Replies: 30
Last Post: 09-27-2015, 11:42 AM
-
By Gil_ in forum Auto Detailing 101
Replies: 11
Last Post: 07-20-2015, 01:12 PM
-
By Dereksdtail in forum Auto Detailing 101
Replies: 16
Last Post: 08-12-2014, 11:58 AM
-
By bugguy67 in forum Auto Detailing 101
Replies: 7
Last Post: 04-01-2013, 03:02 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks