1987 Corvette Show Car Makeover - SONAX Showcase

[RedXray]

Don't know.

Here's what I do know... going to follow their instructions for both products.

Start with firm pressure at 800 RPM make section passes then increase speed to 1200 RPM, reduce pressure and make section passes.

Todd Helme was in the office yesterday and tested these products out on what I believe is a factory black finish on a co-worker's car and results looked incredible.


Just for fun I'm going to test these products with some LC Ultra-Fiber Microfiber pads on both rotary and DA's.


Just waiting for Forrest and the rest of the wrecking crew to get here now...

I might take a few pictures with my cell phone and post on the fly using the AG App if there's any interest...

Thanks... I'm thinking about trying the Sonax. Just a guess... their "Nano" might mean Super Micro. I'll wait for your final thoughts before I order.

[Mike@DedicatedPerfection]

Would like to hear some thoughts as well compared to the equivalent products from Menzerna.

[Mike Phillips]

Forrest and his Corvette have left the building...


Products worked wonderfully on the Corvette clear coat. Did two machine step followed by hand application of the Polymer Net Shield and paint looks absolutely flawless and dripping wet.

Here's a teaser shot until tomorrow...





And here's the A-Team

From left to right...

Ken, Tim, Juanito, Paul, Jeff, Forrest, Louie and Oliver




You guys did a GREAT job! Car looks amazing and I know Forrest was digging the shine!

I have some before video showing the swirls in the paint and a walk-around showing the after results plus a short interview with Forrest I'll upload tomorrow...


Time to shut down Autogeek's Garage...

[Benziez]

is it the same thing?

[Chris@AutoCleanse]

Car turned out great as always. You get amazing results no matter what product you use, car looks wet and the color so rich.

[Mike Phillips]

***Update***


I've uploaded and added all the before, process and after pictures to the first 4 posts of this thread...


Check it out!

[waderw24]

Would like to hear some thoughts as well compared to the equivalent products from Menzerna.

+1

[g26er]

Mike, the only gold pads I'm finding on AG are 6.5 CCS pads and looking at the photos it doesn't seem right? Do you have a link the the gold pads you used.

Sorry if you already posted it, I couldn't find it.

Thanks

[SuperiorAutoLLC]

Mike,

I went to school with Forrest and Juan a few years ago; two phenomenal guys! You guys did an awesome job!!

[john b]

how much of the spray sealant did you guys use on the vette?just wondering how many applications a person could get out of one can.