Post Your Unpacking Pictures

[chilly]

My pad washer photobombed his stuff.

That’s a super nice start for maintaining all your hard work

Kudos


Sent from my iPhone using Tapatalk

[VISITOR]

this mitt slide is replacing my grit guard/wash board combo. the problem with the grit guard washboard is that it's connected with two flimsy plastic post adapters that fall off easily which is annoying. the mitt slide is one piece which eliminates that problem...

Mitt Slide - Designed and Made in Korea





searching info on the company, i found that they make their own microfibers among other things. autofiber was the first to carry the mitt slide and it makes me wonder if the company below is their microfiber source...

Custom Microfiber Cloths & Towels - AQA Microfiber Supplies

Microfiber Production: Customized Designs, Colors as OEM and ODM. -AQA

[Setec Astronomy]

this mitt slide is replacing my grit guard/wash board combo. the problem with the grit guard washboard is that it's connected with two flimsy plastic post adapters that fall off easily which is annoying. the mitt slide is one piece which eliminates that problem...

searching info on the company, i found that they make their own microfibers among other things. autofiber was the first to carry the mitt slide and it makes me wonder if the company below is their microfiber source...

Ditto on the annoyance with the GG/Washboard falling apart, I'm going to get one of those Mitt Slides...someday.

As far as the MF source, that could be, but I'd wager that AutoFiber and TRC have more than one source across the range of their products.

[Karl_in_Chicago]

I note on the linked Mitt-Slide site that it mentions it is suited for buckets from 14 to 16 liters. That's an awfully narrow range. While I'm *assuming* there's probably low risk for larger buckets I'm wondering how it does with smaller (since it kind of sticks "up") ones. If just part of the unit is sticking above the water level on a 3.5 gallon bucket and that's all that it is, fine, but if it has fitment problems OR interferes with a gamma seal lid that would be unfortunate. Interested to see your results and thoughts.

[Setec Astronomy]

That's what I use, is 3.5 gal buckets, so I will definitely report back...if/when I get one.

[chilly]

Nice haul! Please report back on how you like those wash pads. My current set of mitts are getting kinda worn and I have been looking for a replacement without having to spend too much $$$.

So, I really like those green and white fuzzy wash pads from Detail Popo

They hold a ton of water and suds and for large flat panels I think they are perfect

Don't get we wrong, they are certainly soft enough to curve and flow but for roofs, hoods, door panels, etc they really cover a lot of ground and seem as gentle as anything else I have used

Heck of a bang for your buck if you ask me

[SNP209]

So, I really like those green and white fuzzy wash pads from Detail Popo

They hold a ton of water and suds and for large flat panels I think they are perfect

Don't get we wrong, they are certainly soft enough to curve and flow but for roofs, hoods, door panels, etc they really cover a lot of ground and seem as gentle as anything else I have used

Heck of a bang for your buck if you ask me

Thanks for the follow up! I'll be ordering some soon.

[Silly Rabbit]

So, I really like those green and white fuzzy wash pads from Detail Popo

They hold a ton of water and suds and for large flat panels I think they are perfect

Don't get we wrong, they are certainly soft enough to curve and flow but for roofs, hoods, door panels, etc they really cover a lot of ground and seem as gentle as anything else I have used

Heck of a bang for your buck if you ask me

I discovered Detail Popo while browsing Carzillas site on one of my many occasions a few years ago. Ordered a chuck of their stuff and really do think they are a kind of hidden gem. Just as good as big name brands but much cheaper priced.