Post Your Unpacking Pictures

[Bruno Soares]

I already lost the EGO turbo clip I got. It "should" be in the garage somewhere but I may just buy another one if I get over there. Haven't used the Oberk squash yet. I think Griot's has been saying Spring on the foamer for a while.

I leave the turbo clip on the blower, just slide it back so it's not on the button for the times I don't want to run on max power. That way I'll never lose it

[Coatingsarecrack]

Holy smokes lol, for me personally anything over 3 would be overkill. I could see using three on my pickup or the wifes jeep cuz the size, but not the buick. Of course i always hose off and at times pretreat if needed in some way b4 doing a rinseless since i already have the hose or pw out for doing the wheels. So only thing on the surface is usually at most road film.

Try out your process and see what works best for you man!

Sent from my SM-S901U using Tapatalk

Do you use a rinseless sponge or GD method (lots of wash towels)?


Sent from my iPhone using Tapatalk

[Coatingsarecrack]

I already lost the EGO turbo clip I got. It "should" be in the garage somewhere but I may just buy another one if I get over there. Haven't used the Oberk squash yet. I think Griot's has been saying Spring on the foamer for a while.

Yeah I saw that in one of there videos but it was on a good sale and said 1/31. Wasn’t holding breath but hope they new something I didn’t know.


Sent from my iPhone using Tapatalk

[opie]

Do you use a rinseless sponge or GD method (lots of wash towels)?


Sent from my iPhone using Tapatalk

Lots of mf towels, one per panel. So i guess gd method?

Sent from my SM-S901U using Tapatalk

[DFB]

With a rinseless sponge leaving a lot of dirt encapsulated on paint I figure I’ll need 3-5 per car….. overkill?


Sent from my iPhone using Tapatalk

I use two of the medium 15 x 24 Gauntlets when rinse-less washing a large sedan or coupe. One to mop up the excess water and spread the drying aid, the second finishes it off. I have four of them on hand.

[opie]

I use two of the medium 15 x 24 Gauntlets when rinse-less washing a large sedan or coupe. One to mop up the excess water and spread the drying aid, the second finishes it off. I have four of them on hand.

Towels still work good after using drying aids many times?

Sent from my SM-S901U using Tapatalk

[Coatingsarecrack]

Towels still work good after using drying aids many times?

Sent from my SM-S901U using Tapatalk

My PFM’s from 2019 are still going strong.


Sent from my iPhone using Tapatalk

[DFB]

Towels still work good after using drying aids many times?

Sent from my SM-S901U using Tapatalk

Yes, no problem at all. And that's from using a wide variety of drying aids too, from quick detailers, gloss enhancers, spray waxes, rinse-less wash products and Si02 spray sealants.

I do wash them within a couple of hours after use in a specific microfiber detergent though. In my opinion, the specific detergent makes the most difference in keeping towels performing over an extended period.

[opie]

Yes, no problem at all. And that's from using a wide variety of drying aids too, from quick detailers, gloss enhancers, spray waxes, rinse-less wash products and Si02 spray sealants.

I do wash them within a couple of hours after use in a specific microfiber detergent though. In my opinion, the specific detergent makes the most difference in keeping towels performing over an extended period.

Cool thanks, i would hate to ruin all my newish gauntlets. I did try using some of my different drying towels with bead it up as a drying aid when i did a rinsless last time on the buick. Worked well, i did not wash them yet but right after i tossed them in a bucket to soak in 3d towel kleen. Hope that works

Sent from my SM-S901U using Tapatalk

[Coatingsarecrack]

Yes, no problem at all. And that's from using a wide variety of drying aids too, from quick detailers, gloss enhancers, spray waxes, rinse-less wash products and Si02 spray sealants.

I do wash them within a couple of hours after use in a specific microfiber detergent though. In my opinion, the specific detergent makes the most difference in keeping towels performing over an extended period.

I think that’s the ticket is I wash them when done. I actually add some F&C detergent to my MF wash.

Was in a old Griots video but the said MF detergents are there to remove waxes, sealants and polishes and the F&C gets the dirt and grime.

Also I think washing on hot has gotten more gunk out of them to keep them running


Sent from my iPhone using Tapatalk