-
Super Member
White Rust
Hi guys,
any ideas as to how to get rid off the white rust on the metal in the engine compartment (or anywhere) ?
I'd preferably like to use a product(s) available in Australia, but open to all suggestions.
Cheers !!
Flex 3401 & PE14
-
Super Member
Re: White Rust
I haven't seen that for a while, but I remember using WD-40 and a fine wire brush years ago. They may be something more up to date now.
Sent from my motorola edge 20 fusion using Tapatalk
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
-
Super Member
Re: White Rust
Wire brush
-
Super Member
Re: White Rust
You need an acid based product to remove this.
You can buy specific products, but try using white vinegar. Start at a 50/50 dilution and work your way up from there.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: White Rust
Originally Posted by
DFB
You need an acid based product to remove this.
You can buy specific products, but try using white vinegar. Start at a 50/50 dilution and work your way up from there.
Spray on only or using some sort of brush as well ?
(I was also thinking adding soda bicarbonate, I know it works wonders with white vinegar).
Flex 3401 & PE14
-
Super Member
Re: White Rust
Originally Posted by
Danube
Spray on only or using some sort of brush as well ?
(I was also thinking adding soda bicarbonate, I know it works wonders with white vinegar).
From memory, you can use bicarb as well, teamed with a brush. You will need to rinse it with clean water to neutralize afterwards.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Bookmarks