AutoScrub NanoSkin Medium Grade Wash Mitt: Is this normal?

[Paul A.]

Thats what mine looked like when new and has performed great since.

[raheelc]

Thats what mine looked like when new and has performed great since.

Thanks for the confirmation! Glad I can stick with this one :-) would have ruined my detailing plans for the weekend if I had to return it!

[Kamakaz1961]

That is normal and it works awesome!! I would not worry about it. Keep on truckin with the detailin!! BTW, this is the only way I will clay. Saves so much time!!

[raheelc]

That is normal and it works awesome!! I would not worry about it. Keep on truckin with the detailin!! BTW, this is the only way I will clay. Saves so much time!!

Thanks! Yeah I've used a clay bar before and never really liked it, so when I saw this product I had to give it a try! This is the process that I'm considering using:

1. Wash and clean wheels with Sonax
2. Wash with Chemical Guys Maxi Suds II Super Suds (using a foam blaster)
3. Iron X
4. Re-foam with Maxi Suds while Iron X is still on the vehicle and wash again with a wash mitt (This step taken directly from a post by Mike Phillips)
5. Rinse the vehicle
6. Apply another layer of Suds to the vehicle, and rub the vehicle out with Nanoskin Fine Grade Wash Mitt
7. Rinse
8. Dry
9. Blackfire Gloss Enhancing Polish (applied by hand. Don't have a polisher at the moment)
10. Blackfire Crystal Coat Paint Prep
11. One coat of Blackfire Crystal Coat Paint Coating

Do these steps look good? Anything I should change/add/remove?

[GSKR]

Looks like it was manufactured right before the lunch bell went off...

That's definitely not normal. Send me a PM with your order number and I'll get it swapped out ASAP.

Now that's customer service!

[shagnat]

Thanks! Yeah I've used a clay bar before and never really liked it, so when I saw this product I had to give it a try! This is the process that I'm considering using:

1. Wash and clean wheels with Sonax
2. Wash with Chemical Guys Maxi Suds II Super Suds (using a foam blaster)
3. Iron X
4. Re-foam with Maxi Suds while Iron X is still on the vehicle and wash again with a wash mitt (This step taken directly from a post by Mike Phillips)
5. Rinse the vehicle
6. Apply another layer of Suds to the vehicle, and rub the vehicle out with Nanoskin Fine Grade Wash Mitt
7. Rinse
8. Dry
9. Blackfire Gloss Enhancing Polish (applied by hand. Don't have a polisher at the moment)
10. Blackfire Crystal Coat Paint Prep
11. One coat of Blackfire Crystal Coat Paint Coating

Do these steps look good? Anything I should change/add/remove?

Whew!! I can only wish I had enough energy to do all of that in one day!!

[Paul A.]

Looks like a great process to me! Enjoy it.