Great site

**galen** · 07-28-2007, 04:44 PM

Hey everyone. Just stumbled onto this site. It has a lot of very good info. I have a black car that needs some fine tuning so I'll be asking questions in other forums. I'm in northern Missouri, close to Kansas City. Later G

**JoeD** · 07-28-2007, 04:55 PM

Welcome galen, you came to the right site. No Need to ask questions on other forums this forum has some wonderful, qualified detailers that are willing to help you with what ever questions you might have and AutoGeek is the place to purchase your detailing needs. There service and quality are the best.

**galen** · 07-28-2007, 05:00 PM

Thanks Joe. It's about 92 out right now in little old Smithville. My shop is not air conditioned so I'm going to wait until it cools down a little before I jump into the getting a perfect finish. I have a pc 7524 but have never used it. I'm a little intimidated but once I get the steps down I'll be OK. G

**Rsurfer** · 07-28-2007, 05:03 PM

Welcome to the forum and ask away. Lots of pro's here that will give you some solid advise.

**Rsurfer** · 07-28-2007, 05:04 PM

What products will you be using with your PC?

**galen** · 07-28-2007, 05:22 PM

Well I have some that were recomemded to me but I don't know a damn thing about working a finish. I just know that the finish is pretty good on my X but it still needs to be better. I bought the car a month and a half ago, and now I'm seeing little things that the dealer's detail man hid. There are fine swirl marks in one door and little stuff all over. I have bought Menzerna Final Polish II, and Finishing Touch Glaze. Then I also have Blackfire Wet Diamond All Finish Paint Protection. My car is fiberglass so the guy that sold me this stuff said this was what I needed for it. No heet build up. I'll have to go to the shop to see what pads I have. I know I sound like a dumb-a$$ but I just don't know about this stuff. It can't be that hard. Is it? Thanks.

**Rsurfer** · 07-28-2007, 05:27 PM

Originally Posted by galen

Well I have some that were recomemded to me but I don't know a damn thing about working a finish. I just know that the finish is pretty good on my X but it still needs to be better. I bought the car a month and a half ago, and now I'm seeing little things that the dealer's detail man hid. There are fine swirl marks in one door and little stuff all over. I have bought Menzerna Final Polish II, and Finishing Touch Glaze. Then I also have Blackfire Wet Diamond All Finish Paint Protection. My car is fiberglass so the guy that sold me this stuff said this was what I needed for it. No heet build up. I'll have to go to the shop to see what pads I have. I know I sound like a dumb-a$$ but I just don't know about this stuff. It can't be that hard. Is it? Thanks.

No it's not that hard. Sounds like you have some good products. Remember just one thing when polishing especially on black, go with the least aggressive pad and polish. If your not getting the results you want than move up to something more aggressive. You should be fine. Good Luck

**galen** · 07-28-2007, 05:35 PM

Great state Rsurfer. Went to big Island in 2000. Rented a car and drove to Volcano. Ask the locals the best way to get to the vent. Boy was that a mistake! I walked 6 mile through the jungle and finally got there. But by the time I was to be back, my wife panicked. And called the first responders. (volunteer fire) Well thats another story. LOL

**Rsurfer** · 07-28-2007, 05:41 PM

Originally Posted by galen

Great state Rsurfer. Went to big Island in 2000. Rented a car and drove to Volcano. Ask the locals the best way to get to the vent. Boy was that a mistake! I walked 6 mile through the jungle and finally got there. But by the time I was to be back, my wife panicked. And called the first responders. (volunteer fire) Well thats another story. LOL

LOL Funny, guess it wasn't funny at the time.