-
11-24-2018, 03:21 AM
#101
Re: Video: Trying P&S Bead Maker for the first time.
Originally Posted by Daviddear30
Some people care.
Oh they absolutely do. And I agree with you 100% yet again.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
11-24-2018, 08:02 AM
#102
Re: Video: Trying P&S Bead Maker for the first time.
Originally Posted by Klasse Act
I am subscribed to a number of YouTube channels and have gotten a lot of info over the past 7 months away, there is a HUGE world out there, filled with info, never heard of products here and characters. In no particular order:
-Forensic Detailing
-Pan the Organizer
-Scott from Dallas Paint Correction and Luxury Microfiber
-Car Ckeaning Guru
-Apex Detailing
-Auto-Fanatic
Each offers something different and each one is passionate and knowledgeable and I look forward to each and every new video. Not sure where these get the time to do these videos, I know I couldn't do it but I personally might be helping to do some videos for a rather large company in the future. I told them I'm a motormouth so I hope they have someone great at editing, LOL. I'll try to instill my passion into these vids, if and when they get made and hope they offer info and are fun to watch!
Now you'll have to excuse me, I need to check the status of Beadmaker, hopefully it's in the Land of Lincoln by now!
You're forgetting about Sandro from Car Craft Auto Detailing; his videos are the best I've come across on youtube.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
11-24-2018, 08:17 AM
#103
Super Member
Re: Video: Trying P&S Bead Maker for the first time.
I'll check him out
So my bottle of Beadmaker is in the state of Illinois, so I should be getting it by the time I'm off of work on Monday. That said, the weather has decided to change for the worse, so not sure when I'll actually be able to apply it. I'm also waiting to hear about temps and when I can actually apply it, anyone know?
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
11-24-2018, 08:51 AM
#104
Re: Video: Trying P&S Bead Maker for the first time.
Originally Posted by Klasse Act
I'll check him out
So my bottle of Beadmaker is in the state of Illinois, so I should be getting it by the time I'm off of work on Monday. That said, the weather has decided to change for the worse, so not sure when I'll actually be able to apply it. I'm also waiting to hear about temps and when I can actually apply it, anyone know?
Sent from my SM-G950U using Tapatalk
Check out his correction videos, the best!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
11-24-2018, 10:13 AM
#105
Super Member
Re: Video: Trying P&S Bead Maker for the first time.
Just ordered a gallon of Beadmaker on the Cyber Sale. Hope I won't be disappointed
-
11-24-2018, 10:27 AM
#106
Super Member
Re: Video: Trying P&S Bead Maker for the first time.
Originally Posted by Pats300zx
Just ordered a gallon of Beadmaker on the Cyber Sale. Hope I won't be disappointed
Damn Pat, you went more in than me
I mean I'll admit, I'm hooked and got sucked in, what remains now is getting it in my hands and being able to use it down in the garage when we get a warmer day outside so its atleast 50 down in the garage. I can't get answer about the product and temp usage on the lower end so I'm going with 50. I also might have to go to my buddy's graphic shop where I know its heated but even then, 8 hr cure time, what happens when I go from warm work shop to cold air to slightly warmer air?
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
11-24-2018, 10:32 AM
#107
Super Member
Re: Video: Trying P&S Bead Maker for the first time.
Originally Posted by Klasse Act
Damn Pat, you went more in than me
I mean I'll admit, I'm hooked and got sucked in, what remains now is getting it in my hands and being able to use it down in the garage when we get a warmer day outside so its atleast 50 down in the garage. I can't get answer about the product and temp usage on the lower end so I'm going with 50. I also might have to go to my buddy's graphic shop where I know its heated but even then, 8 hr cure time, what happens when I go from warm work shop to cold air to slightly warmer air?
Sent from my SM-G950U using Tapatalk
Ha ha. I did !!! With the sale it was just better to get the gallon. I figured if I liked the 16 oz that I would be ordering a gallon a way.
Time will tell
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
11-24-2018, 03:04 PM
#108
Super Member
Re: Video: Trying P&S Bead Maker for the first time.
Originally Posted by Eldorado2k
Nobody here is or was “bashing” the bead maker product.
No offense, but I really don’t think people here are impressed or even interested in your youtube stats or credentials. This is a detailing forum, not a youtube forum. And just because people here like detailing, it doesn’t necessarily mean they even go on youtube to check out detailing related content. I for 1 spend probably the least of my time on youtube checking out detailing videos.
Sorry to disagree with you, but I watch all the detailing content I find on youtube
-
11-24-2018, 03:13 PM
#109
Super Member
Re: Video: Trying P&S Bead Maker for the first time.
Pan has a new video where he answers his viewers questions, 24 of them. He does speak about his ranking and showed an award he received from YouTube.
I see Mike is going to be @ P&S, surely Beadmaker will make an appearance, let's see what he says about it....
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
11-24-2018, 03:49 PM
#110
Super Member
Video: Trying P&S Bead Maker for the first time.
Originally Posted by WRAPT C5Z06
You're forgetting about Sandro from Car Craft Auto Detailing; his videos are the best I've come across on youtube.
He is great for sure. Him and Brian of Apex Detailing are must watch channels.
I stopped following Pan and Dallas long ago. Forensic is not bad. I tend to fast forward through his topics unless it’s really interesting.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Similar Threads
-
By OrangeVee in forum How to Videos
Replies: 17
Last Post: 01-05-2021, 07:04 PM
-
By PaulMys in forum Auto Detailing 101
Replies: 15
Last Post: 08-12-2019, 09:17 PM
-
By abileneautoworx in forum Auto Detailing 101
Replies: 100
Last Post: 01-10-2019, 07:11 PM
-
By Firehouse Mike in forum Ask your detailing questions!
Replies: 5
Last Post: 12-30-2018, 03:59 PM
-
By OrangeVee in forum How to Videos
Replies: 0
Last Post: 11-18-2018, 02:11 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks