Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: How To: Properly Clean & Maintain a Coated Windshield
Originally Posted by Nick@Autogeek
Nope - you can simply mix it with water and make your own.
It'd be prone to freezing if we did this during winter right? Or does it have antifreeze properties?
2011 Toyota Camry SE - Magnetic Gray Metallic
-
Super Member
Re: How To: Properly Clean & Maintain a Coated Windshield
I have a couple of correlated questions, plus I'm waiting for answers to some of the questions posted above.
What backing plate do I use with my PCXP for the 5" CarPro Rayon pads?
Will FlyBy30 be available as a standalone product without superfluous towels and applicators?
I already have gallons of D120. Shouldn't that work just fine?
-
McKee's 37 Product Support
Re: How To: Properly Clean & Maintain a Coated Windshield
Originally Posted by PiPUK
A couple of thoughts...
- Coatings/sealants - just like with paint products, there are some coatings which are actually sealants. Unlike with paint products, it is harder to identify because it is pretty easy to get a very strong bond to glass. For instance, I have a coating which lasts for 18 months to 2 years. Alternatively I have several sealant type products which will last a year or longer. If it wasn't for me telling the customers, the sealant is more than durable enough to be sold to compete with some coatings, even though it costs about 10 times less to make.
- Use of top up products on a coating. I am uncertain about the wisdom of this. Not all such boosters will be the same but I know that neither of our booster repellents will offer the same water repellency as the longer life products. Perhaps more crucially, they tend to degrade more via contamination 'sticking' than abrasive removal. What that means is that performance drops because they get dirty rather than because they are removed. In other words, put them on top of the coating and the performance is dictated by the booster, not the coating. To rejuvenate, you need more thorough cleaning than the coating alone... Personally, I go with one approach or the other.
Your input is appreciated.
I refrain from using my windshield washer fluid and wiper blades as often as I can, because the coating (any coating) isn't going to get better from the abrasion created by the windshield wipers...it's going to get worse.
If I absolutely HAVE to clean my windshield in between washes, I use Pinnacle Crystal Clear Glass Cleaner because it is very mild and it boosts the hydrophobic properties of the coating. It's a win win in my book.
Originally Posted by CDot
It'd be prone to freezing if we did this during winter right? Or does it have antifreeze properties?
It doesn't have antifreeze properties, so if you live in a northern climate you will still want to use the proper washer fluid.
Originally Posted by SameGuy
I have a couple of correlated questions, plus I'm waiting for answers to some of the questions posted above.
What backing plate do I use with my PCXP for the 5" CarPro Rayon pads?
Will FlyBy30 be available as a standalone product without superfluous towels and applicators?
I already have gallons of D120. Shouldn't that work just fine?
1. 5 inch backing plate. Reason being, a 5 inch backing plate isn't actually 5 inches. They're usually an 1/8th of an inch or so under 5 inches.
2. That's a great glass cleaner, but not one that I would use to maintain a coated windshield. It is more of an aggressive cleaner, which is not necessary for a coated windshield.
-
Super Member
Re: How To: Properly Clean & Maintain a Coated Windshield
Noted, thanks. I'll save it for inside the car, and in/out on un coated cars.
Max owes you a raise. My Wish list and cart keep growing every time you post.
-
Super Member
Re: How To: Properly Clean & Maintain a Coated Windshield
And the FlyBy30? Already have Ceriglass and Eraser, applicators, MFs...
-
McKee's 37 Product Support
Re: How To: Properly Clean & Maintain a Coated Windshield
Originally Posted by SameGuy
And the FlyBy30? Already have Ceriglass and Eraser, applicators, MFs...
It's only available in a "kit" at this time. I've detailed a lot of cars, and I work on my own cars more than I should...one thing I've learned is that you can never have too many microfiber towels or applicators.
-
Super Member
Re: How To: Properly Clean & Maintain a Coated Windshield
Don't I know it! LOL My wife cringes every time she pulls into the garage and has to face the entire rack shelf unit (six 36"x18" shelves) stacked full of sorted and categorized clean MFs, mitts, sponges and pads... Then she gets out of the car and sees the three-section laundry hamper full of used MFs and pads. Hehehehe
-
Super Member
Re: How To: Properly Clean & Maintain a Coated Windshield
What I have found is most 3 stage glass products are relatively the same. You need to adjust your technique to the product in most cases. My combination is Optimum based, but that doesn't make it the best for anyone.
Crispy 2001 Pontiac Grand Prix DD, always clean (except today) Hobby Detailer
Similar Threads
-
By Polochon in forum Auto Detailing 101
Replies: 8
Last Post: 05-23-2020, 12:05 PM
-
By Mike Phillips in forum How to articles
Replies: 16
Last Post: 03-12-2020, 09:14 AM
-
By Nick McKees37 in forum How to Articles
Replies: 52
Last Post: 03-06-2018, 01:55 AM
-
By AliMusa in forum Auto Detailing 101
Replies: 7
Last Post: 08-27-2013, 08:55 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks