-
Super Member
Re: DA Glass Correction (scratch removal) with CarPro
Awesome guide for using Ceriglass! As someone else who has also polished glass with the same CarPro combo take Swanicyouth's point about keep Ceriglass wet seriously. Be ready to spray just enough DI water to keep CeriGlass damn but not runny. It'll dry very quickly otherwise.
-
Super Member
Re: DA Glass Correction (scratch removal) with CarPro
As I noted in another thread, I didn't WW each section or window after I finished it and had the hazing problem mentioned in the OP. I ended up using more Eraser and a waffle-weave glass towel to remove the haze.
But on CarPro's own videos, they suggest letting CeriGlass haze up for thirty minutes before removing it with the same rayon applicator (or pad in this case). I may try that on my next FlyBy30 car, tomorrow.
PS: thanks again for this guide. It gave me the stones to get the products and apply the principles myself!
-
Re: DA Glass Correction (scratch removal) with CarPro
Awesome thread. Does anyone know if using CarPro system on a rotary can produce the same swirl-free result as well?
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Bookmarks