How to use the CR Spotless Water Deionization Systems

[LegacyGT]

How did you like the video quality?

Watch it again, forget about the guy talking, check out the high quality of the actual presentation.

Our Tech Guru Yancy did all the filming running two cameras and did all the video editing, audio editing, graphics, intro, music and ending.

I tell you what I think, Yancy is one very talented guy...

Video was shot under some very challenging conditions such as full direct sun with dark black subjects, exposure turned out very well (better than I was expecting).

Framing and product positions were well though out, and made the video interesting and informative, and I enjoy the slight downward angle shots from the boom.

Transitions, graphics and music were straight up professional.

The time lapse was a really good touch, and it is hard without having the footage to look at, but I may have tried to slow it down a bit, or do a second shot where you can see a close up of a few beads evaporating slowly. Could have also been too hot, I know when I was out at a car show on the fourth, my car surface was 160F

[shoeless89]

I'm gonna get one some day!

[Mike Phillips]

Mike, what's with all the centering rings and washers? I have the older system with the gray housings (the largest one, so it has bigger cartridges), and it doesn't have any of that stuff.

If it didn't come with it then you don't need them.

The centering rings keep the filter cartridge centered inside the housing for uniform, efficient water flow.

[Setec Astronomy]

If it didn't come with it then you don't need them.

The centering rings keep the filter cartridge centered inside the housing for uniform, efficient water flow.

Ok, they certainly have made a lot of improvements to the systems since I got mine some years ago; the TDS meter is really nice, mine just has the go/no-go light.