Thanks: 0
Dislikes: 0
-
Super Member
Re: Key Repair-Step by Step Procedure
wow wow wow Ricky! top notch work!
i wish u lived in NC, i would see if i could get u to shadow me while i do this with my G35. i have a nice scratch which i inherited when i bought the car in 05 and also wifey keyed the door near the handle when opening the door with the keys in her hand(she was more upset than me btw cause she knows i baby this car). also there are some rock chip spots on the hood too. i would be so nervous doing this though.
i would definitly have to tape near the edges of the door since the scratch is pretty close. also i dont have a rotary so correction would be done with my PC.
-
Super Member
Re: Key Repair-Step by Step Procedure
Originally Posted by Flash Gordon
Nice save Richy!
Thanks for the kind words Flash!
Originally Posted by A.P.A.D.
wow wow wow Ricky! top notch work!
i wish u lived in NC, i would see if i could get u to shadow me while i do this with my G35. i have a nice scratch which i inherited when i bought the car in 05 and also wifey keyed the door near the handle when opening the door with the keys in her hand(she was more upset than me btw cause she knows i baby this car). also there are some rock chip spots on the hood too. i would be so nervous doing this though.
i would definitly have to tape near the edges of the door since the scratch is pretty close. also i dont have a rotary so correction would be done with my PC.
For close to edges, you can use a product like Langka or Dr Chip. I got to within about 1/4" of the one edge. I checked it with the gauge a few times before doing that!! BTW, I would not recommend it with a PC. You just won't have the power. That's why I was suggesting a Dynabrade too..it is very powerful amongst Rotaries. The key is to being able to do the correction at the lowest speed possible (along with wool) to keep the heat to an absolute minimum!
And, thank you.
-
Super Member
Re: Key Repair-Step by Step Procedure
One of the most amazing repairs I have seen outside of a body shop! That gives me a lot of hope that I can fix something that bad. Thanks for showing Richy!
Rule 62: Don't take yourself to d*mn seriously
Cincinnati, OH
Shawn
-
Super Member
Re: Key Repair-Step by Step Procedure
Originally Posted by shoeless89
One of the most amazing repairs I have seen outside of a body shop! That gives me a lot of hope that I can fix something that bad. Thanks for showing Richy!
Thanks for those very kind words. I do appreciate it!!
-
Junior Member
Re: Key Repair-Step by Step Procedure
Great work on the repair and thanks for the write up.
Quick question. I am not familar with the Permanon Platinum product. Did you use a spray gun for speed, product requires it, uses less product, or some other reason?
-
Super Member
Re: Key Repair-Step by Step Procedure
Richy, awesome job. Tell me something, what is Permanon Platinum?
I read that you said you actually SPRAYED the whole car with it?
To you and Mike...can a heat gun be used to help speed up the curing process or is this not advised?
Also i was wondering what PTG do you use? I hate to buy one but as a buddy of mine on here suggested, its cheap insurance when doing classic cars with original paint....or when doing heavy compounding or sanding.
I'll send you a PM with a couple more questions .
Great job...my drivers doors are keyed (had to buy em at a bone yard a few years back after an accident)...now i want to go out there and give this a shot.
-
Re: Key Repair-Step by Step Procedure
There used to be a post about permanon here, maybe deleted by AG
Richy's review of permanon
[ame=http://www.youtube.com/watch?v=22Bz2L1-Bnw]Permanon Review - YouTube[/video]
For paint meter, I have the highline meter II
-
Super Member
Re: Key Repair-Step by Step Procedure
How far does that Permanon Platinum go?
-
Super Member
Re: Key Repair-Step by Step Procedure
Originally Posted by 604_Snooze
There used to be a post about permanon here, maybe deleted by AG
Richy's review of permanon
Permanon Review - YouTube
For paint meter, I have the highline meter II
Wow, thats pretty cool. So the difference w/the car he did in the vid compared to the one in the write up is he used an HVLP to apply it now instead of the flow master (id assume a little would go a lot further with an HVLP).
Any follow up vid as to how this held up to brake dust etc? Might be a separate subject, not trynig to jack the thread here lol
-
Super Member
Re: Key Repair-Step by Step Procedure
Originally Posted by RoPaJa
Great work on the repair and thanks for the write up.
Quick question. I am not familar with the Permanon Platinum product. Did you use a spray gun for speed, product requires it, uses less product, or some other reason?
Permanon Platinum is a nano spray coating similar in properties to ReLoad. The cool thing about it is that you can spray it on and blow it off or dry it off with a towel. It is a great choice for things like the barrels of wheels that you would normally have to pull in order to access well. Not with this, spray on, blow off..done! Google "permanon review" and you'll see one that I did. It is listed here too, but may get pulled.
The PP is sold as a concentrate. You mix between 5 to 10% product with 90-95% distilled water. It takes very little. The key is to spray it on evenly and lightly. I saw that application method on a You Tube video about Permanon and tried that method. I love it. You use far less and get great results.
Originally Posted by Wills.WindowsAndWheels
Richy, awesome job. Tell me something, what is Permanon Platinum?
See my above comments.
I read that you said you actually SPRAYED the whole car with it?
Yup, I used a spray gun and it works great that way. You can use a pump sprayer too. The key is to atomize the spray as much as possible.
To you and Mike...can a heat gun be used to help speed up the curing process or is this not advised?
Also i was wondering what PTG do you use? I hate to buy one but as a buddy of mine on here suggested, its cheap insurance when doing classic cars with original paint....or when doing heavy compounding or sanding.
I'll send you a PM with a couple more questions .
Great job...my drivers doors are keyed (had to buy em at a bone yard a few years back after an accident)...now i want to go out there and give this a shot.
Thanks. I changed the colour so as to not confuse your question with my comments. I use THIS gauge here. I love it. Accurate and very reasonably priced. I've had mine for a few years now. Don't do this work without one. The risk is too high. My gauge has saved my ass a few times where I've assumed there would be enough paint based on the type of car it was...and there wasn't. Saved me from being too aggessive and paying the price.
I don't know about the heat. It might make it gummy. I would think air drying best, but hopefully Mike will chime in here too. PM him if he doesn't see your post.
Originally Posted by 604_Snooze
There used to be a post about permanon here, maybe deleted by AG
Richy's review of permanon
Permanon Review - YouTube
For paint meter, I have the highline meter II
That, too, is my choice of gauge and I highly recommend it. Several people on here and elsewhere have purchased one on my recommendation and have been very happy with it.
Thanks for posting the vid too.
Similar Threads
-
By Jacob Harrod AUTOCLEAN in forum Auto Detailing 101
Replies: 16
Last Post: 12-14-2020, 08:49 PM
-
By Mike Phillips in forum How to articles
Replies: 9
Last Post: 08-20-2019, 10:25 AM
-
By Mike Phillips in forum How to articles
Replies: 69
Last Post: 08-21-2018, 08:59 AM
-
By prateek07 in forum How to make money detailing cars
Replies: 1
Last Post: 11-21-2016, 07:31 PM
-
By kc's in forum Show N' Shine
Replies: 4
Last Post: 07-16-2010, 01:19 PM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks