I know exactly what you mean, Tato. I have a black car and when it spends even a nanosecond in this FL sun you can't even touch it. I wouldn't even think about turning my rotary on it.
Printable View
I know exactly what you mean, Tato. I have a black car and when it spends even a nanosecond in this FL sun you can't even touch it. I wouldn't even think about turning my rotary on it.
Since a correction involves hours of effort I find parking under a tree frustrating due to the amount of pollen and dirt that settles on the just-washed surface. Toweling off each section before polish or wax I feel as though I'm marring the work already done. The contaminants fall on my gear & towels, too.
I haven't found an answer to this dilemma.
I strongly agree. Parking under a tree to machine compound, polish or wax a car is a recipe for disaster. Kind of depends on the time of year though. If the leaves are dying and falling off the tree then definitely a no-no. If it's windy and pollen season then also a no-no.
It is possible in some areas and with some trees to get away with it but definitely a worst-case scenario.
That will work. Then use my 5-gallon bucket tip to avoid the canopy blowing away.
:)
Did you ever get that garage built?
Good tip. A person could also use something like the Guzzler Waffle Weave Drying Towel - Only instead of drying with it, because it has a foam core, wet it first and use it to cool down a panel right before buffing.
Common question because it's a common problem...
One of the first articles I wrote when I came to work for Autogeek was called,
Respect
The post date for the above article was 08-17-2009, 12:33 PM
I wrote the above article after doing my first detail here at Autogeek.All I remember was about 30 minutes into the washing the car I was drenched in sweat. Never experienced anything like that before because before moving to Florida I lived in Oregon and California. And while it could get hot in both Oregon and California we didn't have the high humidity to go with it.
This first detail was also very strange for me. I have never really detailed "new" cars. All my life I've mostly detailed Special Interest Cars, or SIVs.
Here's the link to the first full write-up I wrote when coming to work for Autogeek.
Step-by-Step How-To use the Porter Cable 7424XP
And I started that morning by washing a car in FULL SUN.
http://www.autogeekonline.net/galler.../detail-30.jpg
Anyway, working in full sun is tough but sometimes all you can do is all you can do.
:)