Thanks: 0
Likes: 0
Dislikes: 0
-
-
Super Member
Re: Updated FLEX XFE7 -15 aka The Finisher!
Hi Mike,
I assume this is Flex's latest "Free Wheeling DA", correct? Boy, that sure looks sweet! (I might have to finally break down, and "graduate"!)
And so does that Lincoln, just a gorgeous car. And it looks like a million in the pics so far that I've seen, but I know if there's any flaws-shortcomings to be found, you'll find them, and you and the students will address them to the nines. I cannot wait to see the final pics when she's all done! Will be interesting to see what processes, products, tools, and what final LSP is chosen?
-
Super Member
Re: Updated FLEX XFE7 -15 aka The Finisher!
Cant wait wish i could be there with the team
-
Re: Updated FLEX XFE7 -15 aka The Finisher!
Mike, Do I see a 5 1/2" pad??? 5" Backing Plate?? If so YES!!!!!!!
-
Super Member
Re: Updated FLEX XFE7 -15 aka The Finisher!
I only have one question? Why is the pad facing down where it can pick up contaminates? I never lay by Flex down that way. You know I'm kidding Mike what am I thinking. You have a whole warehouse full of new pads at your disposal.
2011 Compass Latitude Bright Silver/ 2017 Nissan Rogue SV AWD Premium Glacier White
REFLECTIVE IMAGE DETAILING
-
Super Member
Re: Updated FLEX XFE7 -15 aka The Finisher!
Mike - any update when they will be in stock at Autogeek?!?
Keep Calm... and Detail On!
Eric
-
Re: Updated FLEX XFE7 -15 aka The Finisher!
Mike how did you like the cord? Is it the soft rubber that is easy to work with , or more like the hard yellow ones like at lowes?
I am always looking for good cords.
-
Re: Updated FLEX XFE7 -15 aka The Finisher!
Finally! A 5" plate for this machine! When will these new machines ship?
I recently cut down my 6" to run the smaller 5.5" pads. Man what a difference it makes.
Let us know how it goes.
-
Regular Member
Re: Updated FLEX XFE7 -15 aka The Finisher!
Man i just orderd the flex 3401
-
Re: Updated FLEX XFE7 -15 aka The Finisher!
Originally Posted by aceone
Mike, Do I see a 5 1/2" pad??? 5" Backing Plate?? If so YES!!!!!!!
Yes.
That's a Lake Country ThinPro 5.5" orange foam cutting pad. It's my guess that's what's going to be needed to remove the swirls and scratches out of the paint on the Lincoln.
Originally Posted by WAXOFF
I only have one question? Why is the pad facing down where it can pick up contaminates? I never lay by Flex down that way. You know I'm kidding Mike what am I thinking. You have a whole warehouse full of new pads at your disposal.
Ha ha...
I would place the FLEX upside down but then the words FLEX would be upside down. For what it's worth, one of my favorite tools is the Tornador Air Blowout Gun and I use it religiously to blow off that roll-around stand you see in many of my pictures. I actually scrub the mat on the stand and then blow it out as I also place microfiber towels on it. Like you see here in this article...
How to use Griot's Garage to detail your car - A detail job Richard Griot would be proud of!
Originally Posted by EWtheDETAILER
Mike - any update when they will be in stock at Autogeek?!?
I'll ask and see what I can find out.
Originally Posted by JeffM
Mike how did you like the cord? Is it the soft rubber that is easy to work with , or more like the hard yellow ones like at lowes?
I am always looking for good cords.
Love the cord. Probably the nicest extension cord I've ever used. The best investment for anyone spending money on quality tools especially when the tools start going over $300.00
Originally Posted by Mike@DedicatedPerfection
When will these new machines ship?
I'll ask and see what I can find out.
Originally Posted by Thenissanguy
Man i just ordered the flex 3401
Don't feel bad... you just made a GREAT investment into one of the best tools on the market. I coined the name
The Beast
That's how I sign my FLEX how-to books and now FLEX has officially adopted this name for the tool and for a good and accurate reason... it's a BEAST!
My quote for the 3401 goes like this,
With a FLEX 3401 you can power through a detail job -Mike Phillips
And it's true. The 3401 doesn't care one bit the shape or curve of a body panel or even top cap on a boat. There's nothing you can do to stop the pad from rotating or oscillating and for this reason you can POWER THROUGH A DETAIL JOB as fast as humanly possible while still maintaining professional quality results.
Whenever I detail cars professionally, (that means for pay), I tend to use the FLEX 3401 because I simply don't have a lot of spare time anymore and I need to work as fast as I can while still putting out professional grade and even show car quality work. The FLEX is the best tool of choice in my opinion for production detailing for cars, boats and motorhomes. Fast correction without swirls.
The key of course like I alwasy harp on here in the forum world and in the real world is to always use GREAT abrasive technology. It's so important that the stuff touching the paint is the best you can obtain otherwise you'll get micro-marring when using an orbital tool and gross holograms when using a rotary buffer.
Similar Threads
-
By Mike Phillips in forum Product Reviews by Mike Phillips
Replies: 1
Last Post: 06-29-2017, 04:26 PM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 9
Last Post: 02-15-2017, 06:24 PM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 5
Last Post: 11-17-2016, 08:46 AM
-
By Mike Phillips in forum Company & Forum News Headlines
Replies: 8
Last Post: 11-14-2016, 12:35 PM
-
By Mike@DedicatedPerfection in forum Flex Polishers
Replies: 34
Last Post: 05-18-2016, 12:09 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks