I bit the bullet.. I just bought a G21

[Eldorado2k]

As far as other pads go, I love how hydrotech and thinpro pads work with the rupes. Microfiber pads are another sets of pads to consider.

So not too big of a drawback from the Hydrotech and Thinpro pads not having a hole in the center? I'm wondering how big a factor that really makes. Since I'm new to this I've got a hole pad mentality. Lol.

Do you ever get the feeling the microfiber cutting pads on 21mm are overkill? They're already pretty beast on a regular DA.

[Eldorado2k]

I just jumped on the Boss G21 package deal from the newsletter a couple weeks ago too. Couldn't pass that up! I'm just waiting for the weather to warm up a bit so I can take some paint off something :-p I'm interested to see how much different it feels than my Rupes 15.

Which pads did you choose? And what kind of compound/polish do you have on hand and looking forward to trying?

[Eric@CherryOnTop]

Which pads did you choose? And what kind of compound/polish do you have on hand and looking forward to trying?

I think I got 3 microfibers and 2 whites. I also picked up some HD Adapt which I've heard excellent things about and some HD Polish. I'm a pretty regular user of Menzerna for corrections and HD Speed for AIOs. I'm thinking now about expanding on the BOSS line cos I'm hearing such great things about the liquids....

[Mike@ShineStruck]

You'll prob use the orange pads allot I know I have

I recently purchased the low pros for durability
And 1 Thin pro.. Wish they had a center cooling hole

I'll prob buy one of each of thin compare cut/finish
As for the works as a system....eh
Between the 3 pads I've only noticed inbalance free spin at speeds 5 and 6
At speed 4 it all felt the same

[The Guz]

El Cheapo happened😂
I figured it was going to cost me almost $100 more to get what I bought today choosing the Rupes. And then you include the 5" Rupes backing plate which is like $40! Ouch.. And it's not even the new MARKll backing plate they're charging that much for.. There came a point where I looked at what the real differences were between the 2 and whether they justified the extra cost.

But yea, it's kinda funny. I know I sold out a bit. Oh well, as long as it works. Lol.

It's all about patience lol. In reality you don't need the 5" backing plate with the Rupes since you still have your HF DA. Anyway you should enjoy the G21. I almost picked up a Boss myself until Nick convinced me to get the Mark II.

On a side note listen to Jason Rose on the latest episode of the Auto Detailing Podcast. He talks about the multi tool approach. I think you will find that interesting.

I also forgot the new thin LC pads. There is a review around here or on Autopia about them.

I think I got 3 microfibers and 2 whites. I also picked up some HD Adapt which I've heard excellent things about and some HD Polish. I'm a pretty regular user of Menzerna for corrections and HD Speed for AIOs. I'm thinking now about expanding on the BOSS line cos I'm hearing such great things about the liquids....

There have been some great reviews on the fast correcting creme. I'm still not sold on HD Polish after using it. I still end up going back to M205. Post up your thoughts when you use it. I am planning to play around with HD polish a little more.

[usmcpab]

So not too big of a drawback from the Hydrotech and Thinpro pads not having a hole in the center? I'm wondering how big a factor that really makes. Since I'm new to this I've got a hole pad mentality. Lol.

Do you ever get the feeling the microfiber cutting pads on 21mm are overkill? They're already pretty beast on a regular DA.

I don't feel like it's much of a drawback not having the hole. Just takes a couple of extra seconds to center the pads. As far as the microfiber pads go, I really only use them for compounding spots with tough rids. If I was compounding an entire car, I really do feel it would be overkill and it would probably thin the clear excessively.

[Justin at Final Inspection]

Congratulations. I love the addition of the g21 to my arsenal of polishers. Great tool and great warranty

[04accord]

Nice! I have a hf DA and just bought a rupes 15 (mk1) last week.

[custmsprty]

Congratulations, it's a great machine. I just walked in the house from a full detail on my neighbors black 2014 370Z with my G21 with 5" bp and 5.5" B & S pads. The G21 is a beast. it powered right through all the curves on the Z. I'll be posting it in a little while.

[ski2]

Been very pleased with the G15--cut my polishing time in half with little fatigue.

Take a look at the B&S Low Pro pads--very high quality and very smooth on the G15-- Mini Review-- Buff & Shine Low-Pro Foam Pads for Long Throw Polishers