Dislikes: 0
-
Super Member
Re: 6in Orbital to 15mm
AaronE, did you make the switch to a long throw? I have the GG2 and was having the same thoughts as you.
And, think you for your service. It is appreciated.
-
Regular Member
Re: 6in Orbital to 15mm
Originally Posted by Me Time
AaronE, did you make the switch to a long throw? I have the GG2 and was having the same thoughts as you.
And, think you for your service. It is appreciated.
Thank you for your support! I love what I get to do for bug blue (it's actually drill weekend for me).
I did jump to a 21mm orbital and love it! It made fast work with D-166 on a car that had never been detailed (2002 Lincoln LS). I "bacon crisped" one pad just a little from heating it up (I learned with a regular LC flat pad to brush it every pass and do shorter section passes). I love how fast it is to correct paint with it!
Sent from my SM-G950U using Autogeekonline mobile app
-
Re: 6in Orbital to 15mm
Originally Posted by AaronE
Hey everyone (I'm just full of questions today), I'm kicking the idea of upgrading the 6in DA to the BOSS 15mm throw orbital.
How does the 15mm throw handle curves compared to the 8mm throw? Do you notice a real difference in the amount of time you spend working on compounding and polishing? Does the added power make a difference during your process? Are these differences worth the added cost?
Thanks for you input!
Sent from my SM-G950U using Autogeekonline mobile app
the griots is only good for flat panels, the stall is awful. Buy the Rupes MarkIII they have made huge improvements with that model as far as stalling. It basically doesn't stall.
-
Regular Member
Re: 6in Orbital to 15mm
Originally Posted by fightnews
the griots is only good for flat panels, the stall is awful. Buy the Rupes MarkIII they have made huge improvements with that model as far as stalling. It basically doesn't stall.
The 21mm I bought isn't sold by Autogeek sadly but I did not have any bog down or stall on the Lincoln LS I buffed with an LC flat pad and the thin pro.
Sent from my SM-G950U using Autogeekonline mobile app
-
Super Member
Re: 6in Orbital to 15mm
Originally Posted by fightnews
the griots is only good for flat panels, the stall is awful. Buy the Rupes MarkIII they have made huge improvements with that model as far as stalling. It basically doesn't stall.
That's interesting because my Griots 15 never stalled in curves like my Rupes 15MKII. With the extra power of the G15 I was able to overcome most stalling.
If you are still interested in getting rid of your G15, I will definitely take it off your hands.
Sent from my SM-N960U using Autogeekonline mobile app
-
Regular Member
Re: 6in Orbital to 15mm
What kind of curves are you working? Everyone seems to have a different definition. When I was shopping brands I leaned heavy towards Griots due to price and ability (the winner not from AG sadly had the power, ergonomics, and better price point) and when I spoke with them on the phone, they said that the curves most people talk about are on more exotic cars. I detail Detroit steel (being a rust belt kid and dedicated to American cars) as a DIYer so.its right up my alley.
They have some attachment that helps with large curves to prevent stalling if needed
Sent from my SM-G950U using Autogeekonline mobile app
-
Super Member
Re: 6in Orbital to 15mm
Originally Posted by AaronE
What kind of curves are you working? Everyone seems to have a different definition. When I was shopping brands I leaned heavy towards Griots due to price and ability (the winner not from AG sadly had the power, ergonomics, and better price point) and when I spoke with them on the phone, they said that the curves most people talk about are on more exotic cars. I detail Detroit steel (being a rust belt kid and dedicated to American cars) as a DIYer so.its right up my alley.
They have some attachment that helps with large curves to prevent stalling if needed
Sent from my SM-G950U using Autogeekonline mobile app
I had a Nissan Juke, Genesis Coupe, and now a Mazda6, which are all pretty curvy and there was some stalling, but most of the time, it was overcome with moving up in speed or change in grip to keep the pad flat.
I love Griots due to the phenomenal customer service and warranty. I have and like Rupes as well, but if I need a polisher to hammer out some paint defects, I find myself going for my GG6 or G21 more often than my Rupes 15MKII.
With the types of cars you are working with, the G15 would do great.
Sent from my SM-N960U using Autogeekonline mobile app
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: 6in Orbital to 15mm
Originally Posted by DETAILROOKIE
but most of the time, it was overcome with moving up in speed or change in grip to keep the pad flat.
you bring up a great point DR. here's a video by joe (nextlevelautodetail) where there are many curves and narrow/thin panels on this vehicle and he does exactly what you just mentioned by adjusting his technique...
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Regular Member
Re: 6in Orbital to 15mm
I never saw the technique video there but I guess I did it intuitively if I ran into a problem, but I honestly don't remember even having one.
I'm like you DR, I use my 21mm DA for a lot of my work now and then my GG6 for large areas I can't easily use my 21mm. And if that's still too big, I have a 3mm rotary from the company who makes my 21mm DA that does the job.
Sent from my SM-G950U using Autogeekonline mobile app
-
Super Member
Re: 6in Orbital to 15mm
Originally Posted by fightnews
the griots is only good for flat panels, the stall is awful. Buy the Rupes MarkIII they have made huge improvements with that model as far as stalling. It basically doesn't stall.
I've never had issues with my G15 stalling. Works great.
Similar Threads
-
By Mike Phillips in forum PICTURES: 3-Day CAR Detailing Bootcamp Classes
Replies: 2
Last Post: 04-06-2018, 02:40 PM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 5
Last Post: 11-17-2016, 08:46 AM
-
By Mike Phillips in forum Product Reviews by Mike Phillips
Replies: 15
Last Post: 04-24-2016, 02:15 AM
-
By Mike Phillips in forum Product Reviews by Mike Phillips
Replies: 89
Last Post: 03-15-2016, 12:26 PM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 25
Last Post: 02-18-2016, 09:29 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks