Thanks: 0
Likes: 0
Dislikes: 0
-
Re: Griots Garage 3 inch HD Backing Plate
Will this backing plate work well with a 7424?
Also, will it work well with Lake Country pads? I like the idea of matching backing plates to pads for compatible hook-and-loop materials.
-
Super Member
Re: Griots Garage 3 inch HD Backing Plate
Originally Posted by derass
Will this backing plate work well with a 7424?
Also, will it work well with Lake Country pads? I like the idea of matching backing plates to pads for compatible hook-and-loop materials.
if it fits the GG6, then it will fit the PC (or any other DA with the same size thread spindle like below) and it should be fine to use with the lake country pads as well...
-
Junior Member
Re: Griots Garage 3 inch HD Backing Plate
Originally Posted by VISITOR
if it fits the GG6, then it will fit the PC (or any other DA with the same size thread spindle like below) and it should be fine to use with the lake country pads as well...
That looks like the LC 3" backing plate correct Visitor?
-
Re: Griots Garage 3 inch HD Backing Plate
Originally Posted by mikejames
Seems like a lot of us have the same idea,the GG6 is half the price of the Rupes mini. Please post your findings when you test it against your Rupes mini.
Will do
I find the Rupes mini lacks power on speed 4.5
And was looking into switching that to thin pros and or adding the new kamikaze BP..but for that price I can be almost to GG6 range
Still may buy a Zentool mini to compare also then sell off the one I like the least
-
Super Member
Re: Griots Garage 3 inch HD Backing Plate
Just ordered some of the Boss 3" pads to use with this BP and a HF DA. With how thin these pads are I'm hoping rotation won't be a problem.
I had similar thoughts about getting the Kamikaze BP, but for around the same price, or slightly more depending on what you go with, you can have a dedicated 3" setup.
____________
"The more answers I seek, the more questions I find."
-
Super Member
Re: Griots Garage 3 inch HD Backing Plate
I'm also interested to hear you guys' review of this new 3" backing plate vs. the Lake Country.
Sent from my iPhone using Tapatalk
-
Super Member
Re: Griots Garage 3 inch HD Backing Plate
I'll only be able to review it by itself unless everyone starts giving their other 3" plates away after this comes out.
To Nothingface: I think the 3" BP that's not sold here is only for the Duetto. The mini should have a lighter counter balance and it might not work well with that BP. Unless they make one for the mini too.?
____________
"The more answers I seek, the more questions I find."
-
Re: Griots Garage 3 inch HD Backing Plate
Originally Posted by Mantilgh
I'll only be able to review it by itself unless everyone starts giving their other 3" plates away after this comes out.
To Nothingface: I think the 3" BP that's not sold here is only for the Duetto. The mini should have a lighter counter balance and it might not work well with that BP. Unless they make one for the mini too.?
yeah its new,but noone has it in stock yet...i orderd it from their UK distributor..but after 2month or so i cancelled it
the 3in beast is for duetto
the 3in katana is the new BP for the Mini
obviously the one benefit of spaced away from the anti spin shroud wont be an advange for the mini, as it doesnt have one..but figured rotating mass would be less
-
Super Member
Re: Griots Garage 3 inch HD Backing Plate
Originally Posted by mikejames
That looks like the LC 3" backing plate correct Visitor?
yes, just using the picture for reference in regards to the spindle as being the same size threading as the GG3 hd backing plate...
-
Re: Griots Garage 3 inch HD Backing Plate
I'm not a big fan of chemical guys, but their 3" TORQ backing plate is awesome!
Sent from my iPhone using Autogeekonline mobile app
Similar Threads
-
By Mike Phillips in forum How to articles
Replies: 25
Last Post: 10-07-2021, 02:58 PM
-
By xxxc5 in forum Griot’s Garage Polishers - BOSS - 6" DA - 3" DA
Replies: 3
Last Post: 11-22-2019, 01:13 AM
-
By Mike Phillips in forum Product Reviews by Mike Phillips
Replies: 26
Last Post: 01-12-2018, 02:56 PM
-
By jehsautosalon in forum Griot’s Garage Polishers - BOSS - 6" DA - 3" DA
Replies: 5
Last Post: 09-26-2016, 05:41 PM
-
By Witty4242 in forum Product Reviews
Replies: 19
Last Post: 02-16-2014, 11:49 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks