Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: 1st day with my Flex 3401
I imagine anyone familiar with the use of a Rotary Polisher would maybe not have a difficult transition to the Flex 3401.
I think I can talk from a bit of experience, is to use one of those "boat anchor" Christopher Columbus Milwaukee Rotarys with Wool Pad from 30-40 years ago, and you'll truly understand the definition, and meaning of "walking"! LOL
Closing my eyes, and seeing myself with one of these in hand years ago, I could make a comic movie! That ain't no crap!
The Flex has to be a breeze by comparison.
-
Junior Member
Re: 1st day with my Flex 3401
-
Re: 1st day with my Flex 3401
If you're a beginner, get a GG 6" DA or 3401. The Rupes LHR21 takes very good technique to get the most out of it, especially on non-flat panels.
-
Super Member
Re: 1st day with my Flex 3401
Originally Posted by MarkD51
I imagine anyone familiar with the use of a Rotary Polisher would maybe not have a difficult transition to the Flex 3401.
I think I can talk from a bit of experience, is to use one of those "boat anchor" Christopher Columbus Milwaukee Rotarys with Wool Pad from 30-40 years ago, and you'll truly understand the definition, and meaning of "walking"! LOL
Closing my eyes, and seeing myself with one of these in hand years ago, I could make a comic movie! That ain't no crap!
The Flex has to be a breeze by comparison.
I'd be scared to near machine like that .
I didn't want to make it sound like the Flex was difficult to use, it isn't, just a small learning curve to get used to it. I'm a newbie when it comes to machine polishing but it only took a couple of section passes to figure it out.
-
Super Member
Re: 1st day with my Flex 3401
Y'all running 6.5 Hybrids or 5inch?
I have the 4 3/8 BP, trying to pick
Charleston, SC
FLEX 3401, PC 7424xp, HF DA I Opticoated my shower......
-
Re: 1st day with my Flex 3401
I like the new Meg's foam pass better than the hybrid pads.
Sent from my iPhone using Tapatalk
-
Super Member
Re: 1st day with my Flex 3401
Originally Posted by ZL1 Mark
I like the new Meg's foam pass better than the hybrid pads.
Sent from my iPhone using Tapatalk
Why do you like the Meg's pads better?
I bought some the Meguiars pads before I got the Flex and was planning on using them with my GG DA. Then ended up getting some Hybrids after reading how everyone really liked how they worked with the Flex.
-
Re: 1st day with my Flex 3401
Originally Posted by FocusSTguy
Why do you like the Meg's pads better?
I bought some the Meguiars pads before I got the Flex and was planning on using them with my GG DA. Then ended up getting some Hybrids after reading how everyone really liked how they worked with the Flex.
The hybrid pads lose their firmness after a bit of polishing; they become mushy. The Meg's new foam pads do not do that. They also make the 3401 enjoyable to use.
Sent from my iPhone using Tapatalk
-
Super Member
Re: 1st day with my Flex 3401
Originally Posted by FocusSTguy
Why do you like the Meg's pads better?
I bought some the Meguiars pads before I got the Flex and was planning on using them with my GG DA. Then ended up getting some Hybrids after reading how everyone really liked how they worked with the Flex.
i've used the new megs foam (yellow polishing) with the GG6 and it works well, though IME it seems to soak up product a little faster (a little softer as well) due to how thin they are. if I were to do order them for the first time at a minimum I would order at least five. one can never have enough pads...
-
Re: 1st day with my Flex 3401
Originally Posted by ZL1 Mark
The hybrid pads lose their firmness after a bit of polishing; they become mushy.
Actually.... all foam pads lose their firmness as they become wet with product. That's the nature of foam.
Originally Posted by ZL1 Mark
The Meg's new foam pads do not do that.
I would have to disagree with you on that. Even the maroon foam cutting pad softens up with use like all foam cutting pads.
A few pictures of the pads after we buffed out this completely swirled out Camaro and with time and repeated introduction of fresh product to any foam pad the pad will soften and as Mark says, become mushy.
NEW! Meguiar’s Foam Buffing Discs
Originally Posted by ZL1 Mark
They also make the 3401 enjoyable to use.
You mean the Meguiar's foam pads make the Flex 3401 more enjoyable to use over any other foam pad or just over the Hybrid pads?
How?
Similar Threads
-
By IID in forum Flex Polishers
Replies: 18
Last Post: 11-11-2017, 04:35 AM
-
By DETAILROOKIE in forum Auto Detailing 101
Replies: 36
Last Post: 05-25-2017, 10:49 AM
-
By UglyBetty in forum Auto Detailing 101
Replies: 9
Last Post: 10-17-2013, 05:20 AM
-
By MichaelD in forum Boat & Marine Craft Detailing
Replies: 1
Last Post: 10-16-2012, 01:28 AM
-
By Grifftech in forum Auto Detailing 101
Replies: 12
Last Post: 08-29-2012, 02:44 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks