Thanks: 0
Likes: 0
Dislikes: 0
-
Pad advice for someone just starting out.
Hi, I'm about to purchase a flex kit from autogeek, probably this one:
FLEX XC3401 VRG Orbital Polisher Kit with Free FLEX Polisher Bag, FLEX Dual Action Polisher and storage bag, FLEX bag kit
Or alternatively this kit from Amazon (don't know which kit is better):
Amazon.com: FLEX XC3401 XMT Heavy Swirl Remover Kit: Automotive
I get to choose three pads and have no idea which three I will need. Here is my situation, keep in mind I've never touched a polisher before so this is all new. I have two cars, an 05 mercedes and a new corvette. The mercedes has some paint issues, scratches, swirls, just rough paint overall (previous owner I swear!). The vette is in great shape and is garage kept but the paint wasn't perfect from the factory, it has some minor marring and streaking though no deep scratches. I would like to be able to fix the real problems on the merc as well as clean up the vette. Any advice on which three pads I will need? And of course which polishes I will need? I have a bottle of CGs polish but I'm not sure which one, I'll try to post once I find out.
Thanks!
-
Super Member
Re: Pad advice for someone just starting out.
3 pads? You are going to need more... unless you are going to refine and wax by hand.
I think my bare minimum would be 3 polishing, 2 finishing and 1 for wax.
In LC language, that would be 3 orange, 2 grey and 1 red.
2012 Acura CBP TL SH-AWD Tech
-
Re: Pad advice for someone just starting out.
Originally Posted by c8n
3 pads? You are going to need more... unless you are going to refine and wax by hand.
I think my bare minimum would be 3 polishing, 2 finishing and 1 for wax.
In LC language, that would be 3 orange, 2 grey and 1 red.
I see, I've never used one before so can you explain why I need so many? I don't mind applying waxes/sealants by hand, been doing it forever! I really want the polisher to fix defects though I will probably buy more pads in the future to do things right. I could also get this kit with five pads if that would be better:
Dual Action Flex Polisher Kit, Lake Country Pads, Flex XC 3401 VRG Buffer, curved edge pads
Thanks!
-
Super Member
Re: Pad advice for someone just starting out.
When correcting, your pads can get heated which can lead to delamination... the hook & loop part separating from the foam. To prevent such, you want to switch to a fresh pad so that the other can cool down. Second, you can end up with too much build up of product on the pads which will lessen its effectiveness. You should be cleaning you pads on the fly but short of a pad washer, there is only so much product that can be removed using the towel method. I have a mid size 4 door sedan and 3 pads seems to work for me.
2012 Acura CBP TL SH-AWD Tech
-
Re: Pad advice for someone just starting out.
Originally Posted by c8n
When correcting, your pads can get heated which can lead to delamination... the hook & loop part separating from the foam. To prevent such, you want to switch to a fresh pad so that the other can cool down. Second, you can end up with too much build up of product on the pads which will lessen its effectiveness. You should be cleaning you pads on the fly but short of a pad washer, there is only so much product that can be removed using the towel method. I have a mid size 4 door sedan and 3 pads seems to work for me.
Good to know, thanks for the info! So if I purchase the five pad kit which pads would you recommend?
Thanks!
-
Super Member
Re: Pad advice for someone just starting out.
I have not used a Flex but I know it to be a more powerful machine than a PC. If I were to pick up pads for a PC, I would do 3 orange, 1 grey and 1 red. You should use the orange for compounding, the grey for finishing polish and red for your wax. Or if you prefer waxing by hand, I would go with 2 grey.
2012 Acura CBP TL SH-AWD Tech
-
Re: Pad advice for someone just starting out.
Originally Posted by c8n
I have not used a Flex but I know it to be a more powerful machine than a PC. If I were to pick up pads for a PC, I would do 3 orange, 1 grey and 1 red. You should use the orange for compounding, the grey for finishing polish and red for your wax. Or if you prefer waxing by hand, I would go with 2 grey.
Thanks for being so helpful! So the three oranges would be for defect removal, the grey would bring out the shine (less abrasive I assume), and the red would be to apply a sealant? I think that is what I will go with. Any thoughts on which polishes to use with the pads?
Thanks!
-
Super Member
Re: Pad advice for someone just starting out.
I am pretty Meg's bias but really, if you apply the correct techniques, you should have no problems with any of the products AG carries.
Having said that, I use Meg's UC/M105 and UP/M205 combo. I like Meg's because of the SMAT properties which I am sure other brands uses as well. With SMAT, you don't need to worry about the abrasives breaking down and you can stop at any point you feel necessary.
2012 Acura CBP TL SH-AWD Tech
-
Re: Pad advice for someone just starting out.
Originally Posted by c8n
I am pretty Meg's bias but really, if you apply the correct techniques, you should have no problems with any of the products AG carries.
Having said that, I use Meg's UC/M105 and UP/M205 combo. I like Meg's because of the SMAT properties which I am sure other brands uses as well. With SMAT, you don't need to worry about the abrasives breaking down and you can stop at any point you feel necessary.
Sounds good to me, they even have a kit with everything you recommended:
Meguiars Ultra Polish Kit with 5.5 Inch Pads, Meguiars Mirror Glaze Polishes, Meguiar's Polish Kit, 5.5 inch buffing pad kit
I may just buy that to cover all bases!
-
Re: Pad advice for someone just starting out.
Spoke too soon, they have a flex kit with most of what you recommend:
Meguiars FLEX 3401 Ultra Polish Kit with 6.5 Inch Pads, Meguiars Mirror Glaze Polishes, Meguiar's 105 Compound, Meguiar's 205 Ultra Finishing Polish
Once I'm done polishing are there any tricks to cleaning the pads? Should I buy something specific or just use dish soap?
Thanks!
Similar Threads
-
By rancid in forum Ask your detailing questions!
Replies: 7
Last Post: 05-18-2020, 07:51 PM
-
By DetailKitty in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 7
Last Post: 06-05-2017, 07:33 PM
-
By buzz123 in forum How to make money detailing cars
Replies: 12
Last Post: 04-20-2014, 02:08 PM
-
By Lakeside Detail in forum How to make money detailing cars
Replies: 13
Last Post: 02-26-2014, 02:40 PM
-
By Matt@FourAcesMD in forum How to make money detailing cars
Replies: 6
Last Post: 02-26-2014, 01:26 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks