Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Edge adapter FLEX conversions are available
I'm sure this will be a product that Autogeek carries once they are able to get ahead of production on them, but as of now you can send your FLEX backing plate to them and they'll convert it for about $37 bucks shipped back to you. Now that is a sweet deal!
I've had the same problems that others have reported. My backing plate rubbed against the housing and gummed up the gear and put a nice track in the back of the backing plate. I called Powerhouse to get a replacement plate sent and asked that they just send it directly to the Edge for conversion. I should have the new one in a week or so. I'm excited because I think this will solve all my problems. The way that the Edge adapter works with this machine is to center it in the middle of the gear and backing plate. This avoids putting any pressure on the outside track at all and eliminating the possibility of rubbing. Not only do I get to start using my Edge pads with my FLEX, but I also don't have to worry about it burning up the backing plate and spitting black plastic all over the place.
Here is the idea with the backing plate.
I think that will solve a ton of problems with the FLEX. Does anyone at Autogeek have any information about when you'll be able to start carrying this adapter?
-
Super Moderator
Re: Edge adapter FLEX conversions are available
Originally Posted by OCDetails
I think that will solve a ton of problems with the FLEX. Does anyone at Autogeek have any information about when you'll be able to start carrying this adapter?
Edge is currently not selling them to retailers yet, but you can get them directly from Edge.
-
Super Member
Re: Edge adapter FLEX conversions are available
i wonder if they can rework one of the older backing plates?
-
Regular Member
Re: Edge adapter FLEX conversions are available
Originally Posted by pt91
i wonder if they can rework one of the older backing plates?
Yes we can rework any Flex plate as long as the gear is in good shape.
-
Regular Member
Re: Edge adapter FLEX conversions are available
Originally Posted by ZoranC
I am curious does this take only E2K adapter or it will take E3K too.
E3k is only the industrial adapter for high speed rotary machines. This is a special modifled E2K adapter that is left hand threaded to fit and work on the Flex conversion only.
-
Super Member
Re: Edge adapter FLEX conversions are available
Originally Posted by The Edge
Yes we can rework any Flex plate as long as the gear is in good shape.
Can we send our plate to you and get it convert and returned? If so what would be the cost? Also, what we the turn around time be?
-
Super Member
Re: Edge adapter FLEX conversions are available
All I can say is that it is one sweet adapter for a great machine. Fortunatly I was able to purchase one of the few completed units and It works flawlessly.
Ron !!!!!
-
Super Member
Re: Edge adapter FLEX conversions are available
i am mailing one of my flex plates in for the conversion tmrw.
-
Super Member
Re: Edge adapter FLEX conversions are available
Will there be some sort of pad/adaptor combo to entice me from switching from velcro pads?
AP Auto Detailing & Car Care
"Care, Pride, Passion"
Serving the Greater Toronto Area 24/7, 365.
Direct e-mail: info@apautodetailing.ca
-
Re: Edge adapter FLEX conversions are available
As one who waited until the bugs were fixed I am hopeful that I will order a Flex DA soon. Is this the correct procedure: buy a machine from AG then send it to Aaron @ The Edge for a retrofit of the bp with a modified E2K adapter after which it can use the E2K pads? Does this mean that the E2K pads then will work best with the Flex or must I buy another pad system for maximum benefit? Hope not as I prefer to keep the E2Ks, but will do what's required to get the most from the machine and polishing sessions.
Similar Threads
-
By hofiveo in forum Flex Polishers
Replies: 18
Last Post: 02-19-2011, 10:02 PM
-
By 99C5Coupe in forum Flex Polishers
Replies: 13
Last Post: 08-06-2009, 08:30 AM
-
By ScottB in forum Flex Polishers
Replies: 7
Last Post: 04-22-2009, 04:06 PM
-
By dionnfr in forum Flex Polishers
Replies: 24
Last Post: 11-04-2008, 03:33 PM
-
By tonym in forum Auto Detailing Tools and Accessories
Replies: 9
Last Post: 05-09-2008, 07:37 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks