-
Flex PXE80 -Official 2" backing Pad and Flexible shaft
Not sure if this is old news but just seen these two releases on the Flex site.
BP-M D50 2" BP for PXE80 -
Power the Jobsite | FLEX
FS-150 Flexible shaft for PXE80
Power the Jobsite | FLEX
-
Super Member
Re: Flex PXE80 -Official 2" backing Pad and Flexible shaft
Nothing found.... links not working. Flex site does not recognize those numbers?
I found a 2" backing plate (556.115) but the thread is reversed, won't fit a PXE shaft.
-
Re: Flex PXE80 -Official 2" backing Pad and Flexible shaft
This was on the European site I believe.
Part numbers are :- 509.248 for BP, 516.112 for the flexible shaft kit.
-
Re: Flex PXE80 -Official 2" backing Pad and Flexible shaft
Thanks for the info as I hadn't seen those. I wish the PXE had brushes like the iBrid. That's the big thing I feel is missing.
-
Re: Flex PXE80 -Official 2" backing Pad and Flexible shaft
-
Re: Flex PXE80 -Official 2" backing Pad and Flexible shaft
Rupes has 3 brushes for the iBrid Nano, horsehair, soft nylon, and hard nylon brushes.
Others Archivi - Rupes tools
I’ve seen some use those brushes for interior cleaning or cleaning emblems on the exterior.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Bookmarks