Thanks: 0
Likes: 0
Dislikes: 0
-
Re: What (mini + carpet brush)machine to buy next to flex!
Originally Posted by postaltwo
The price is not cheap no doubt ,but it the smoothist machine out there and u don't have to buy many machines so u save money there
I read a little about it it's great machine
I will make comparison between cyclo and flex 4031
Thank you
Sent from my SM-G935F using Tapatalk
-
Super Member
Re: What (mini + carpet brush)machine to buy next to flex!
You could always do the carpets and seat with a brush by hand until you decide if you want a dedicated unit for the task. Since you state that you are outside of the US you will also have to figure what you can purchase in the correct voltage. The polishers are not variable voltage units.
-
Re: What (mini + carpet brush)machine to buy next to flex!
Some do come in either 110V or 220 V. The Flex and the cyclo do, I'm not sure about the PC and the Griot's.
-
Super Member
Re: What (mini + carpet brush)machine to buy next to flex!
personally, i wouldn't choose a cyclo if it's the only machine you are going to get/have. it's cumbersome (hard to get into tight spots as well) and with a traditional pc-style DA, you can change out backing plate and pads which makes it more versatile...
-
Re: What (mini + carpet brush)machine to buy next to flex!
There is nothing that prevents you from changing the backing plates on a Cyclo. In fact, there are backing plates made by most companies that are specifically designed for the Cyclo. I would go so far as to say that most of the backing plates for 4" pads are targeted for the Cyclo, as are most 4" pads. My logic is that there is no real reason to have any pad sizes betweeen 5"-5.5" and 3.5", aside from the fact that the pad size on the Cyclo is 4". The Cyclo has been on the market for over 50 years now, and between the build quality (needle and ball bearings, heavy aluminum castings, and the availability of parts for even the earliest of the Cyclo polishers,and made in the USA) I would bet that the vast majority of Cyclo polishers (Cyclo says there are >150K Cyclo units out there) are fully functional. Add to that the VES system (vibration reduction) being able to be retrofitted to eveb teg early Cyclos, the polisher will remain a perfectly good, usable polisher for many years.
As for its ability to get to tight spaces, it would be as good as any other polisher that uses 4" pads, just turn it sideways.
Also, Mike Philips has done a number of videos with the Cyclo.
Is it an alternative to teh Flex 3401. When it comes to paint correctioni, no, nothing is. Simple as that. The forced rotation of the 3401 makes it king of paint correction. It is more versatile, yes. It is also a random orbit type polisher, which is somewhat safer than the 3401.
I don't own a Cyclo, but have considered it. My PC is fine for now, but when I do decide to move on from the PC, I can get a 3401, and use the PC to do carpets and/or tight spaces with a 3.5" backing plate and pads.
I still think the Cyclo has a place in detailing for those who choose to use it. It hasn't survived for >50 years becase it is ineffective or lacking.
-
Re: What (mini + carpet brush)machine to buy next to flex!
Originally Posted by VISITOR
personally, i wouldn't choose a cyclo if it's the only machine you are going to get/have. it's cumbersome (hard to get into tight spots as well) and with a traditional pc-style DA, you can change out backing plate and pads which makes it more versatile...
I couldn't disagree more . I don't find it cumbersome at all and quite easy to get into tight spots. And with 2 4" pads it's easy to cover alot of ground quickly . Throw included it's covering a 9"wide area. The cyclo is silky smooth and make a great 1 polisher option imo
-
Re: What (mini + carpet brush)machine to buy next to flex!
Getting back to the original poster, a Flex 3401 to handle paint correction is ideal. A DA, whether a Flex, Porter Cable, Rupes, or whatever else you may decide on can handle tight areas or carpet cleaning. The issues with the Flex is the limited backing plates available, and the same with the Rupes (depending on which Rupes). In both cases, the Flex and Rupes backing plates are more expensive because they are proprietary. Porter Cable or Cyclo can use backing plates from numerous suppliers, and have a wide variety of sizes. The pads are common to all, depending on backing plates. The Cyclo does have a specific emphasis on carpet cleaning, but there are brushes available in normal DA sizes from a variety of vendors. The Cyclo does have a unique design, with lower vibration, and has a long term track record, great reliability, and parts availability second to none. It is made in the USA, which may not mean much to people living outside the US, but at least you know it didn't come out of a fly by night outfit in China. Lots of options. Maybe a place to start is to look at some videos online for all of the polishers you are interested in, as well as Mike Philip's polishing DVDs.
-
Re: What (mini + carpet brush)machine to buy next to flex!
Originally Posted by Guyb
You could always do the carpets and seat with a brush by hand until you decide if you want a dedicated unit for the task. Since you state that you are outside of the US you will also have to figure what you can purchase in the correct voltage. The polishers are not variable voltage units.
By hand is option but if there's machine it's better and quicker
Yes I will buy 220 V
That what we have here we don't have 110 V
Thank you
Originally Posted by kkritsilas
Some do come in either 110V or 220 V. The Flex and the cyclo do, I'm not sure about the PC and the Griot's.
I have to buy 220 V
We don't have 110 V
Thank you
Originally Posted by VISITOR
personally, i wouldn't choose a cyclo if it's the only machine you are going to get/have. it's cumbersome (hard to get into tight spots as well) and with a traditional pc-style DA, you can change out backing plate and pads which makes it more versatile...
You are right if I get cyclo I need another device with it
Thank you
Originally Posted by kkritsilas
There is nothing that prevents you from changing the backing plates on a Cyclo. In fact, there are backing plates made by most companies that are specifically designed for the Cyclo. I would go so far as to say that most of the backing plates for 4" pads are targeted for the Cyclo, as are most 4" pads. My logic is that there is no real reason to have any pad sizes betweeen 5"-5.5" and 3.5", aside from the fact that the pad size on the Cyclo is 4". The Cyclo has been on the market for over 50 years now, and between the build quality (needle and ball bearings, heavy aluminum castings, and the availability of parts for even the earliest of the Cyclo polishers,and made in the USA) I would bet that the vast majority of Cyclo polishers (Cyclo says there are >150K Cyclo units out there) are fully functional. Add to that the VES system (vibration reduction) being able to be retrofitted to eveb teg early Cyclos, the polisher will remain a perfectly good, usable polisher for many years.
As for its ability to get to tight spaces, it would be as good as any other polisher that uses 4" pads, just turn it sideways.
Also, Mike Philips has done a number of videos with the Cyclo.
Is it an alternative to teh Flex 3401. When it comes to paint correctioni, no, nothing is. Simple as that. The forced rotation of the 3401 makes it king of paint correction. It is more versatile, yes. It is also a random orbit type polisher, which is somewhat safer than the 3401.
I don't own a Cyclo, but have considered it. My PC is fine for now, but when I do decide to move on from the PC, I can get a 3401, and use the PC to do carpets and/or tight spaces with a 3.5" backing plate and pads.
I still think the Cyclo has a place in detailing for those who choose to use it. It hasn't survived for >50 years becase it is ineffective or lacking.
Thank you for your great information
That's what I was asking
You said
--------
As for its ability to get to tight spaces, it would be as good as any other polisher that uses 4" pads, just turn it sideways.
--------
It's great to know that
And flex 4031 I really like it
I think now I can buy 2 machine only
FLEX and cyclo
Or
FLEX and PC
I will do more searching cyclo Vs PC
Thank you
Originally Posted by postaltwo
I couldn't disagree more . I don't find it cumbersome at all and quite easy to get into tight spots. And with 2 4" pads it's easy to cover alot of ground quickly . Throw included it's covering a 9"wide area. The cyclo is silky smooth and make a great 1 polisher option imo
That's great thing of cyclo
I'm sure it's good machine
Thank you
Originally Posted by kkritsilas
Getting back to the original poster, a Flex 3401 to handle paint correction is ideal. A DA, whether a Flex, Porter Cable, Rupes, or whatever else you may decide on can handle tight areas or carpet cleaning. The issues with the Flex is the limited backing plates available, and the same with the Rupes (depending on which Rupes). In both cases, the Flex and Rupes backing plates are more expensive because they are proprietary. Porter Cable or Cyclo can use backing plates from numerous suppliers, and have a wide variety of sizes. The pads are common to all, depending on backing plates. The Cyclo does have a specific emphasis on carpet cleaning, but there are brushes available in normal DA sizes from a variety of vendors. The Cyclo does have a unique design, with lower vibration, and has a long term track record, great reliability, and parts availability second to none. It is made in the USA, which may not mean much to people living outside the US, but at least you know it didn't come out of a fly by night outfit in China. Lots of options. Maybe a place to start is to look at some videos online for all of the polishers you are interested in, as well as Mike Philip's polishing DVDs.
Thank you for your great information
I will look at some video to decide which one to buy
PC or cyclo next to flex
Thanks everyone I appreciate your replies
Sent from my SM-G935F using Tapatalk
-
Re: What (mini + carpet brush)machine to buy next to flex!
Yasser 222 if your set on getting the flex . Honestly I would just get a pc or groits machine for the small spots . Not say the cyclo isn't great. It is . It's just alot of money for minimal use . Imo the cyclo is an excellent main machine where versatility a d comfort is top of the list .
-
Re: What (mini + carpet brush)machine to buy next to flex!
Originally Posted by postaltwo
Yasser 222 if your set on getting the flex . Honestly I would just get a pc or groits machine for the small spots . Not say the cyclo isn't great. It is . It's just alot of money for minimal use . Imo the cyclo is an excellent main machine where versatility a d comfort is top of the list .
Thank you buddy for your advise
You are right
I will be using the machine just a little
As for Polish 6 car
Then coating the car
You know coating will be there at least for 1 year and some 2 years
So the Polish machine will be off until next year
I will be using only the other machine for carpet cleaning and leather all the year
Because of that I don't want to spend to much
I'm now thinking
I Buy flex and use it just once a year for each car
And then use whatever pc or griots for carpet
Or buy cyclo for polish all cars
Then continue use it for carpet and leather cleaning
( even I don't know how often need clean carpet and leather I don't want it to be over kill spacialy the leather its sensitive more that carpet)
And buy PC or griots for Polish small car
I couldn't decide which way I'm going with
But I think I like the first idea flex + pc
I need to do more searching for the devices
Thanks
Sent from my EDI-AL10 using Tapatalk
Similar Threads
-
By Mike Phillips in forum How to articles
Replies: 1
Last Post: 04-30-2020, 11:08 AM
-
By Mike Phillips in forum Product Reviews by Mike Phillips
Replies: 28
Last Post: 07-30-2018, 01:38 PM
-
By bym007 in forum Auto Detailing 101
Replies: 9
Last Post: 03-18-2016, 05:42 PM
-
By Matt@Revive in forum Auto Detailing Tools and Accessories
Replies: 3
Last Post: 04-29-2015, 09:27 AM
-
By RobertJ34 in forum Product Reviews
Replies: 3
Last Post: 04-21-2014, 11:11 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks