FLEX, SONAX & Nick at SEMA

[Perfections]

Both of the new polishes 5/5, 3/6 along with perfect finish are amazing. Got to check out all 3, but it seemed perfect finish wasn't making it to the US until a little after the polishes.

I did learn something pretty cool today at their booth. Sonax owns their own mine so the abrasives in these new polishes are exclusive to them. And the polishes need to be worked over the section for around 30-40 seconds to finish down correctly.

[Nick McKees37]

I was demonstrating Sonax 5/3 (5 = cut (out of 6) and 3 = finish (out of 6) on a Flex PE14-2-150 equipped with an orange light cutting pad and let me tell you, this stuff finishes beautifully. I was shocked at the finish it provided with the amount of cut it had. It also has a very long working time, doesn't dust and wipes off without any effort.

Jason from Sonax was nice enough to hook me up with a bottle of each...you know, for, uh, testing purposes.

[faisal]

Sonax very good stuff specially Perfect finish it enhance gloss to high level

Sent from my GT-I9100 using AG Online

[addysdaddy]

I was demonstrating Sonax 5/3 (5 = cut (out of 6) and 3 = finish (out of 6) on a Flex PE14-2-150 equipped with an orange light cutting pad and let me tell you, this stuff finishes beautifully. I was shocked at the finish it provided with the amount of cut it had. It also has a very long working time, doesn't dust and wipes off without any effort.

Jason from Sonax was nice enough to hook me up with a bottle of each...you know, for, uh, testing purposes.

beware of pic pockets. You might get separated from those bottles on the way home...or something. We know where you get the good stuff.

[Nick McKees37]

beware of pic pockets. You might get separated from those bottles on the way home...or something. We know where you get the good stuff.

You'll be glad to know the bottles safely made it back to Florida.

[Mike@DedicatedPerfection]

Looking forward to your review when you have time their Nick.

[ChrisJ]

I was demonstrating Sonax 5/3 (5 = cut (out of 6) and 3 = finish (out of 6) on a Flex PE14-2-150 equipped with an orange light cutting pad and let me tell you, this stuff finishes beautifully. I was shocked at the finish it provided with the amount of cut it had. It also has a very long working time, doesn't dust and wipes off without any effort.

Jason from Sonax was nice enough to hook me up with a bottle of each...you know, for, uh, testing purposes.

So where is the video of them doing work? Geesh waiting with baited breathe here...Want to see if they are living up to the hype

[addysdaddy]

So do you have an updated ETA on the Sonax Polishes?

[Nick McKees37]

So do you have an updated ETA on the Sonax Polishes?

They will be in stock within a couple weeks.