Live Broadcast May 14th & May 15th - A Select Few!

**Nick McKees37** · 05-06-2011, 09:16 AM

Can't get to Stuart, Florida to attend one of our classes? Then do the next best thing and watch from your computer. Live Broadcast starts at 8:00am and goes to approximately 5:00pm BOTH DAYS Eastern Standard Time. We're going to enable a select few to watch the live broadcast, and then request some feedback. If you're interested, here's your chance to sit in on our Detailing 101 and 102 classes.

SPACES ARE LIMITED so if you are interested please respond to this thread and we will select a couple of you next week!

The first class covers machine polishing and the proper steps on how to remove swirls, apply wax by machine, surface evaluation, and more!

Detailing 101 - Machine Polishing - Saturday May 14th

Now that you've learned the principles of machine polishing, be sure to check out Detailing 102 on Sunday to learn how to wet sand by hand and remove orange peel.

Detailing 102 - Wetsanding, Cutting and Buffing for a Show Car Finish - Sunday May 15th, 2011

**Porsche Pilot** · 05-06-2011, 09:22 AM

Interested in the Sunday cut and buff class feed. I will provide my own snacks too.

**LegacyGT** · 05-06-2011, 10:37 AM

I would like to virtually attend 101 & 102

I am good at giving feedback.

**ferret1980** · 05-10-2011, 02:57 PM

if their is an opening i can go now, but it's too late! the class is full! if any one drop out let me know!

**cutter** · 05-10-2011, 03:29 PM

Nick, I'm interested in the Saturday's class...I think the wet-sanding is out of my league for now...I hope you choose me, I will sit in on both days if chosen and give good feedback!!!

**IID** · 05-10-2011, 03:34 PM

Why only a select few?
In the past,the live feed was offered to ALL AG forum members.

**BillE** · 05-11-2011, 07:42 AM

Originally Posted by IID

Why only a select few?
In the past,the live feed was offered to ALL AG forum members.

Curious also.

Bill

**rjgervacio** · 05-11-2011, 12:40 PM

If possible, I would like virtually attend both 101 & 102. I'm currently working on my Forester and would like to learn more to refine my techniques as I work on my project. Pick me!

Thanks!