Ok guys, Haven't really had much time to edit and cull through photos or do a real write up.
Products and equipment used:
Duragloss 541 cleaner/mildew buster
Pressure Pro Clearly Pink (hydro sulfuric acid diluted 20:1 for rust stain removal)
Marine 31 Gel Coat heavy cut (Makita rotary machine with 3M wool pad)
Rejex
Wolfgang Deep Gloss Paint Sealant 3.0
Pinnacle XMT 360
An assortment of Lake Country 5" and 4" pads
Acetone to remove dead/ oxidized vinyl from seat cushions
Acetone to repair dash (I discovered that on badly cracked/deteriorated rubber dash acetone and a microfiber can be used to "MELT" the rubber into the cracks)
Acetone to remove pine tree sap
303 Aerospace Protectant
303 Fabric Guard
Wolfgang Exterior Trim sealant on rub rails and bright work
A hand rake to remove pine straw and magnolia leaves before vacuuming. (had to vacuum 3 times to get carpet clean)
I am here to say acetone isnt good for seats its the last thing to use.
acetone can take the color wright off the seat.
But if the seat is real bad and you have tryed everything else try it.ps will make the seats hard and start to split apart.
try softscrub with bleach and a scrub bruch.always wet the seat frist to get the treds wet bleach and acetone will eat them away fast when done wash with water for 4 or 5 mins .
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks