Let's see a picture of your boat!

[Mike Phillips]

These are my two.

1999 LaveyCraft 454 EFI.
1977 Taylor SJ 455 Big Block.

Nice boats!

I'm confident I've raced a few Taylor Jet Boats in my life...

[Dan C]

RIP...Tom Papp

Dan

[master_photog]

Here's our boat - I've joined AG in hopes to educate myself in keeping this boat in the condition it's in for years to come.

There are a myriad of items regarding tools and products for autos, hopefully I'll find some good reliable information here pertaining to preserving the finish on the boat!

http://www.cs2photography.com/246b.jpg


Thanks for the forum!!

Chuck in Indy

[FastZR1]

Nice bow rider Chuck. Is that a 24 footer? I like the red and white combo. My first boat was much like that color combo.

I just polished and waxed the starboard side of my boat on Sat. I'll do the port and aft this week and she'll be ready for winter storage. I use the Meguiars’ line of marine waxes and polishes using both my PCXP and Flex DA which makes things a lot easier. My current boat is white with a few black graphics but I still get a nice reflection with the white after the wax is applied.

Ed

[vet]

I've only owned 'Land Boats' lol!

[master_photog]

Thanks for the info Ed! Yes, it is a 24' Bryant bow rider - 2012 - 350 MAG

What I have so far in terms of products is:

Meguiars #20 polymer
Meguiars #135 spray detailer
Cobra deluxe microfiber cloths
Water Sprite chamois

I'm considering the flex xc vrg 3401 polisher OR the Griot's 3" polisher. I like them both and I understand they each have a specific purpose, but I need to determine which one I'll use more (as my budget will be too far north should I get both polishers).

Thanks again!!

chuck

Nice bow rider Chuck. Is that a 24 footer? I like the red and white combo. My first boat was much like that color combo.

I just polished and waxed the starboard side of my boat on Sat. I'll do the port and aft this week and she'll be ready for winter storage. I use the Meguiars’ line of marine waxes and polishes using both my PCXP and Flex DA which makes things a lot easier. My current boat is white with a few black graphics but I still get a nice reflection with the white after the wax is applied.

Ed

[glen e]

This is my 32 wellcraft I had panel painted with Sikkens automotive paint - base epoxy, 3 coats base and 3 coats clear - in 6 years I have never waxed it and it looks like the day I painted it. I just wash it with Meiguirs shampoo.

[clm65]

Funny Glen, I was just reading some of your posts on THT. Then I jump to AG and see more of your posts!

[FastZR1]

Funny Glen, I was just reading some of your posts on THT. Then I jump to AG and see more of your posts!

I saw that too.
I don't post much over there but follow a few of those threads. Some real nice boats on THT.

[jdscooby]