-
Best coating for Aluminum Pontoons?
Im looking for best coating for aluminum toons.. I have tried Mckee's37 wheel coating and its ok but wanted to know if there is a marine specific consumer one..
Thanks..
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Regular Member
Re: Best coating for Aluminum Pontoons?
We intensify every color of the spectrum.
"If it doesn't shine, we didn't do it!"
-
Re: Best coating for Aluminum Pontoons?
-
Re: Best coating for Aluminum Pontoons?
This 3M 09020 Marine Aluminum Restorer & Polish on amazon looks like it might work well. It is reasonably priced compared to some other stuff I was looking at.
Amazon.com: 3M 09020 Marine Aluminum Restorer & Polish: Automotive
I may try it on the 30ish year old 17' Grumman canoe I just got, after I buy a DA or rotary polisher. It will be a lot easier to do with a machine. It's not dirty so much as very well oxidized.
After it's clean and deoxidized, I wonder how well and long the polish part will keep it that way.
-
Super Member
Re: Best coating for Aluminum Pontoons?
McKee's 37 has a marine specific line called Marine 31- they have a product that is specifically designed for pontoons
Marine 31 Pontoon & Aluminum Sealant
-
Super Member
Re: Best coating for Aluminum Pontoons?
Originally Posted by
Floyd
Sharkhide or toon-brite
Be careful with toon brite. It will destroy the finish, and leave them dull. Sharkhide is a good coating. But not a restoring, cleaning product. If they're not barnacle encrusted. Steel wool and lots of elbow grease can work
-
Re: Best coating for Aluminum Pontoons? / Reapplication Schedule for Marine 31 ?
Originally Posted by
JKDesign
Marine 31 seems to emphasize the protection aspect more than any other aluminum cleaning product I've seen.
How often does it require application to work well?
-
Re: Best coating for Aluminum Pontoons?
Do any of these products diminish zebra mussel attachment?
-
Super Member
Re: Best coating for Aluminum Pontoons?
Originally Posted by
DTruck
Do any of these products diminish zebra mussel attachment?
IMO, no product on earth will help with barnacle or mussel attachment. Only mechanical scraping.
Once removed, only very frequent scrubbing, or marine bottom paint will keep growth at bay.
Since the OP asked about aluminum, I'll state this as well: Be SURE to use a bottom paint compatible with aluminum, and NOT a copper-based product. The results would be fatal for the aluminum.
It is no coincidence that man's best friend cannot talk.
-
Newbie Member
Re: Best coating for Aluminum Pontoons?
The green zinc chromate primer works good for corrosion protection
I would use the etching aluminum wheel cleaner and a scotchbrite to clean the surface.
Bookmarks